Tom You will probably need a VSE Stand Alone Dump or at least the Virtual Machine low core and regs..
eric At 03:27 PM 10/16/2006, you wrote: >I got the following disabled wait on a VSE/ESA 2.3.2 system over the >weekend: > >HCPGIR450W CP ENTERED; DISABLED WAIT PSW 000A0000 00001122 > >The VM manual says to check the operating system manual of the OS that >was running at that time. >The VSE messages manuals don't seem to show much about disabled waits. > >Obviously VSE/ESA 2.3 is out of service. And the crash may be nothing >that I can do about it, but.... >at least knowing what might have caused the crash is the first step in >deciding our future course of action (well the future has been >determined...going to a current release, it is the timing that is still >being decided upon). > >So where is the info on VSE disabled waits? > >Thanks > >Tom Duerbusch >THD Consulting Eric Schadow Mainframe Technical Support www.davisvision.com ------------------------------------------------------------------------ The information contained in this communication is intended only for the use of the recipient(s) named above. It may contain information that is privileged or confidential, and may be protected by State and/or Federal Regulations. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender. ------------------------------------------------------------------------
