Years ago we were advised to run with GCS completely inside the virtual
machines or completely outside. With the size of our GCS NSS we run
with 106M and have no storage related problems.
q nss name gcsa map
FILE FILENAME FILETYPE MINSIZE BEGPAG ENDPAG TYPE CL #USERS PARMREGS
VMGROUP
1488 GCSA NSS 0000256K 00000 0000C EW R 00016 OMITTED
YES
00700 0074E SR
0074F 0074F SW
00750 009FF SN
01000 0101A SR
0101B 04FFF SN
Others may disagree.
-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Horlick, Michael
Sent: Thursday, December 07, 2006 9:25 AM
To: [email protected]
Subject: Re: RSCS printer not there but there
Ok, will do.
I have 58 SNA3270P, 11 NJE and 153 LPR (ITO=100 specified) definitions
within my RSCS configuration files with RSCS coming up with 16M virtual
machine size.
Could the 16M be an issue? Should I bump that up?
Thanks
Mike
-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Les Geer (607-429-3580)
Sent: December 6, 2006 4:33 PM
To: [email protected]
Subject: RSCS printer not there but there
I recommend if you are still experiencing this problem to open up a
problem with the IBM support center Something doesn't sound right
Best Regards,
Les Geer
IBM z/VM and Linux Development
>Early this morning we did a VM IPL and I noticed this morning a bunch
of
>files in the RSCS printer queue which should have been printed on some
>LPR printers.
>
>It appears that a VSE machine was sending files to RSCS but that RSCS
>did not recognize the destination printer. It was if the printer was
not
>defined.
>
>
>
>I did the following for one of these printers :
>
>
>
>smsg rscs q v222
>
>DMTCMQ310E Location V222 is not defined
>
><mike> Ready;
>
>
>
>However , if I did 'smsg rscs q sys' I would see as part of the list :
>
>
>
>v222 released LPR 0000 ... ... priority
>
>
>
>I then had to dynamically redefine the printer. For RSCS I have its
>console spooled and I see for this printer :
>
>
>
>06:30:02 DMTCMX005I Location DEVVM(OPERUTIL) executing: START v222 FORM
>*
>
>06:30:02 DMTCMY700I Activating link v222 LPR line0000 class*
>queueingpriority
>
>06:30:04 DMTLPR012I Link v222 exit routine LPRXONE loaded at 00FBC140
>
>
>06:30:04 DMTLPR181I Link v222 ready for session initiation
>
>
>07:08:08 DMTNHD144I Receiving file (0000) on link RVHPCS from
>RVHPCS(SYSCICSG), records 29
>
>HCPCSP053E V222 not in CP directory
>
>
>PRT FILE 2642 SENT FROM RSCS PRT WAS 2642 RECS 0029 CPY 001 N
>NOHOLD NOKEEP
>
>07:08:08 DMTAXM104I File (0000) spooled to SYSTEM -- origin
>RVHPCS(SYSCICSG) 12/06/06 07:08:06 EST
>
>
>
>I have had to dynamically define a bunch of printers and even after
>occasionally a printer would become undefined and I would need to
>redefine.
>
>
>
>How is this possible?
--------------------------------------------------------
If you are not an intended recipient of this e-mail, please notify the sender,
delete it and do not read, act upon, print, disclose, copy, retain or
redistribute it. Click here for important additional terms relating to this
e-mail. http://www.ml.com/email_terms/
--------------------------------------------------------
