Hello. Are you sure you copied the various DATA files over or didn't accidentally modify them? RMCONFIG, RMBxxxxx, DGTVAUTH and DGTVCNTL. The tape library and devices are on line? If you're running in an LPAR can that LPAR see the drives? We are running on a z9, VM5.2 with a tape library and VM:Tape with no problems.
Steve G. Jim Bohnsack <[EMAIL PROTECTED]> Sent by: The IBM z/VM Operating System <[email protected]> 01/26/2007 09:50 PM Please respond to The IBM z/VM Operating System To: [email protected] cc: Subject: RMSMASTR in 64 bits We have just installed a z/9 and are in the testing stage, i.e. "what works and what doesn't". The system is z/VM 4.4 since we are moving from a 9672-G5 class machine. I have my test lpar running on the z/9 under z/VM 4.4 in 64 bit mode. Today, a path to the 3494 tape robot was moved to the z/9 and I XAUTOLOG'd RMSMASTR to see if it would work and I could control the 3494. RMSMASTR is unhappy about something. I'm hoping that someone has seen the following and has a quick answer: FSMRMBLC==> Diag 254 is available FSMBBC0505E Internal error from routine 2523, return code = 3 FSMBBC2028E The specified subsystem 03494 does not exist in VM real IO config FSMSMS3009E Errors have caused DFSMS initialization to stop FSMXXX0505E Internal error from routine 2522, return code = 3 FSMSMS3032I RMSMASTR is stopping RPICMS017I USER/RACF VM Racroute communication path has been terminated. Jim -- Jim Bohnsack Cornell University (607) 255-1760 [EMAIL PROTECTED]
