We just lost access to one of our networks.
I destroyed the vswitch in both LPARs and vary off devices and paths to that
card. I then disabled the osa card and re - enabled it. I then brought up the
device and it showed free. I than define the vswitch and receivced error msg
HCPSWU2830I device not ready.
Message says "Initialization has completed, but the virtual switch controller
received a response from the device indicating that the device is not ready.
The connection to the real hardware LAN is not operational."
Is there anything else I can do to reset or ready the osaII card?
hans Rempel
________________________________________________________________
Sent via the WebMail system at hmrconsultants.com
