Hello Lee,
I am running a Gigabit with the card defined as QDIO on a z890
running zVM 4.3 (yes 5.2 is waiting here too).
The card came defined as QDIO.
But I did apply lots of PTF's to ensure that the z890 and the
QDIO stuff would run.
Take a look here
http://www.vm.ibm.com/perf/aip.html
Ed Martin
Aultman Health Foundation
330-588-4723
[EMAIL PROTECTED]
ext. 40441
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of Lee Stewart
> Sent: Thursday, March 08, 2007 8:54 PM
> To: [email protected]
> Subject: 4.4 & Gigabit (fibre) OSA
>
> Hi all,
>
> I have a 4.4 system that's moving to a new z9 and when they try to
start
> the TCP/IP connection through the new OSA gigabit (fiber, not copper),
> they get:
>
> DTCOSD055E The amount of input and or output queues supported by this
> adapter is insufficient for TCP/IP
>
> And then the link shuts down. The message says to reconfigure the OSA
> card. The card hasn't been loaded with a static OAT or anything...
>
> I've searched here, IBMLink (APARs or PSP buckets, both hardware and
> software) and several other places, but don't see anything.
>
> (Why 4.4 -- Mother says only change one thing at a time. 5.2 is next)
>
> Thanks for any pointers,
> Lee
>
> --
>
> Lee Stewart, Senior SE
> Sirius Computer Solutions
> Phone: (303) 798-2954
> Fax: (720) 228-2321
> Email: [EMAIL PROTECTED]
> Web: www.siriuscom.com
