Hi Ann: You can try draining it with the CP DRAIN. DASD command, but first check if there are any CP areas on the pack, do a QUERY ALLOC. IF there are any in use areas, you will have to get it off the volume. If it's being used for spool you will likely need to back up all your spool.
You should definitely have 2nd level volumes start on real cylinder 1 or beyond. Leave real cylinder 0 to 1st level CP. Hope this helps, David -----Original Message----- From: The IBM z/VM Operating System on behalf of [EMAIL PROTECTED] Sent: Mon 3/12/2007 10:33 AM To: [email protected] Subject: [IBMVM] detach spool pack from system I have a second level spool pack attached on the first level system, it's defined as CP owned pack in the system config on first level. Is there way to detach it dynamically from system without updating config or ipl ? q a557 DASD A557 CP OWNED 52LSPL 0 Ready; cp det a557 system HCPDTS143E DASD A557 in use by system Ready(00143); Thanks, Ann The information contained in this message may be CONFIDENTIAL and is for the intended addressee only. Any unauthorized use, dissemination of the information, or copying of this message is prohibited. If you are not the intended addressee, please notify the sender immediately and delete this message.
