I tried it on a test system before production and got IPL unit error. Both 2nd level guests I used guest directory entry console statement device (0009) as loadparm. ? -James
On 5/21/07, Schuh, Richard <[EMAIL PROTECTED]> wrote:
Link to the disk RR and ipl it with a loadparm of the console address – IPL dev LOADP consaddr Regards, Richard Schuh ------------------------------ *From:* The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] *On Behalf Of *James M *Sent:* Monday, May 21, 2007 10:57 AM *To:* IBMVM@LISTSERV.UARK.EDU *Subject:* Re: system config file Thanks John. Is there a way to show the sapl screen while the system is running? -James On 5/21/07, *John Franciscovich* < [EMAIL PROTECTED]> wrote: Given that, it looks like you'll be ok. The way to verify that this is the disk that will be used the next time you IPL is to display the stand-alone loader screen, and make sure that parm disk 3 is the one being used (there are a couple of ways this could be shown, either as EXTENT 3 or in the IPL parameters). Also make sure that the system config file you changed is the one being used. If the file you changed is named SYSTEM CONFIG, then make sure there are no IPL parameters specifying a different name (with parameters FN= or FT=). If the file has a different name, make sure there ARE parameters FN= and/or FT= specifying that name. John Franciscovich z/VM Development >q cpload indicates parm disk 3 (cf3) which is in fact the disk holding the >system config I modified with the new spool volume. >-James
