I just noticed something about the data I
posted last week.
In the Q NIC output, I have this:
CONNECTION NAME: z/VM0000 STATE: Session Established
DEVICE: 0F00 UNIT: 000 ROLE: CTL-READ
DEVICE: 0F01 UNIT: 001 ROLE: CTL-WRITE
DEVICE: 0F02 UNIT: 002 ROLE: DATA
UNICAST IP ADDRESSES:
10.0.0.7 Mask: 255.0.0.0
10.1.15.2 Mask: 255.0.0.0
10.1.20.100 Mask: 255.0.0.0
10.1.50.12 Mask: 255.0.0.0
10.1.51.22 Mask: 255.0.0.0
10.1.88.7 Mask: 255.0.0.0
10.1.90.2 Mask: 255.0.0.0
And again in the Q VSWITCH this:
ADAPTER OWNER: TCPIP NIC: 0F00 NAME: VSWNIC1
DEVICE: 0F02 UNIT: 002 ROLE: DATA
UNICAST IP ADDRESSES:
10.0.0.7 Mask: 255.0.0.0
10.1.15.2 Mask: 255.0.0.0
10.1.20.100 Mask: 255.0.0.0
10.1.50.12 Mask: 255.0.0.0
10.1.51.22 Mask: 255.0.0.0
10.1.88.7 Mask: 255.0.0.0
10.1.90.2 Mask: 255.0.0.0
All of which implies to me that TCPIP is trying to use
a class "A" mask of 255.0.0.0 . Why should that be,
when the profile definitions for the link are class "B"?
; LINK THROUGH QDIO NIC F00 TO VSWITCH1 - TO MAIN 10.0.0.0/16 LAN
DEVICE NIC-F00 OSD F00 PORTNAME VSWNIC1 ; F00-F02
LINK LAN10 QDIOETHERNET NIC-F00
GATEWAY
10 = LAN10 1500 0.255.0.0 0
DEFAULTNET 10.0.0.6 LAN10 1500 0
Is this what is preventing my vswitch from working correctly?
And if so, what must I do to fix it?
Shimon
--
**********************************************************************
**
Shimon Lebowitz mailto:[EMAIL PROTECTED]
VM System Programmer .
Israel Police National HQ.
Jerusalem, Israel phone: +972 2 542-9877 fax: 542-9308
**********************************************************************
**
