z/VM 5.2.0 will not enable HyperPAV alias volumes. These volumes will be used in traditional PAV mode using the base to alias definitions that the DS8300 requires to be setup. z/VM must tell each LSS to enable HyperPAV alias volumes before they can me used in Hyperpav mode; z/VM 5.2.0 doesn't do this secret handshake.
Regards, Steve.
Steve Wilkins
IBM z/VM Development
"Sikich, Frank
J."
<[EMAIL PROTECTED] To
ionalcity.com> [email protected]
Sent by: The IBM cc
z/VM Operating
System Subject
<[EMAIL PROTECTED] Hiper PAV
ARK.EDU>
07/02/2007 11:31
AM
Please respond to
The IBM z/VM
Operating System
<[EMAIL PROTECTED]
ARK.EDU>
To All:
From my reading Hyper PAV only supported in z/VM 5.3. If Hyper PAV is
turn on for the 8300 will 5.2 just ignore it? Or will I run into some
issues? I plan to go to 5.3 later this year.
Thanks
Frank
-------------------------------------------------------------------------------------------
***National City made the following annotations
-------------------------------------------------------------------------------------------
This communication is a confidential and proprietary business
communication. It is intended solely for the use of the designated
recipient(s). If this communication is received in error, please contact
the sender and delete this communication.
===========================================================================================
