Hello everyone,
On the z/VM system you have the
q cplevel
z/VM Version 4 Release 3.0, service level 0402 (64-bit)
Generated at 08/06/04 13:11:53 EDT
IPL at 12/02/06 02:32:43 EDT
Ready; T=0.01/0.01 16:39:56
On VSE/ESA systems you have the
sir
AR 0015 CPUID VM = 00017D7C20868000 VSE = FF817D7C20868000
AR 0015 PROCESSOR = IBM 2086-160 02 (77D7C02) LPAR = PROD No. =
0001
AR 0015 VM-SYSTEM = z/VM 4.3.0 (0402) USERID = VSE312 VMCF = ON
AR 0015 CPUs = 0001 Cap. = 100%
AR 0015 PROC-MODE = ESA (64-BIT) IPL(74F) 16:17:56 EDT 08/10/2007
AR 0015 SYSTEM = z/VSE 3.1.2 06/09/2006
AR 0015 VSE/AF 7.1.0 DY46685 04/20/2007
What is on Linux, Iseries, and z/OS?
Ed Martin
Aultman Health Foundation
330-588-4723
[EMAIL PROTECTED]
ext. 40441
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of Schuh, Richard
> Sent: Friday, August 10, 2007 4:34 PM
> To: [email protected]
> Subject: Re: Guest in 31 or 64 bit?
>
> Yes, but the choices are ESA, XA and XC.
>
> Regards,
> Richard Schuh
>
>
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of David Boyes
> Sent: Friday, August 10, 2007 1:09 PM
> To: [email protected]
> Subject: Re: Guest in 31 or 64 bit?
>
> > > Is there a way to tell from a CP command if a guest is running in
31
> bit
> > > or 64 bit mode? Thanks Lee
>
> Doesn't IND USER EXT show a MACH= line? OK, not a single function
> command, but the information is there w/o running control blocks.
>
> Still sounds like a requirement, though.
