Hello all,
I need to setup a network for a Linux machine.
After adding the hypersocket link for this (QDIO1),
following TCP/IP startup errors occur:
DTCPRS007E Error encountered in reading PROFILE TCPIP *:
DTCPAR123I Line 67: Gateway not directly accessible in GATEWAY command
...
DTCOSD246I HIPERS device HIPR1: Assigned IP address 192.168.0.10
DTCOSD234I ToOsd: TCPIP host is not set as a router for port VIRTLAN
DTCOSD246I HIPERS device HIPR1: Assigned IP address 192.168.0.3
The physical network is an ADSL router on 192.168.0.1.
z/VM executes on a Flex/ES machine which has 192.168.0.4 as its IP addres
s.
Not being a TCP/IP expert, I would appreciate any help in setting up
the Linux - TCP/IP environment.
Command executed during z/VM 4.3 startup:
----------------------------------------
CP DEFINE LAN VIRTLAN OWNERID SYSTEM TYPE HIPER
User directory for TCP/IP (and Linux):
-------------------------------------
SPECIAL 1D00 HIPER 3 SYSTEM VIRTLAN
PROFILE TCPIP:
-------------
00050 ;
00051 DEVICE [EMAIL PROTECTED] LCS 0E20
00052 LINK ETH_VM431 ETHERNET 1 [EMAIL PROTECTED]
00053 ;
00054 DEVICE HIPR1 HIPERS 1D00 PORTNAME VIRTLAN AUTORESTART
00055 LINK QDIO1 QDIOIP HIPR1
00056 ;
00057 HOME
00058 192.168.0.3 ETH_VM431
00059 192.168.0.10 QDIO1
00060 ;
00061 GATEWAY
00062 ; Network First Link MTU Subnet S
00063 ; Address Hop Name Size Mask V
00064 ;
00065 192.168.0 = ETH_VM431 1492 0
00066 192.168.0 = QDIO1 1500 255.255.255.0 0
00067 DEFAULTNET 192.168.0.4 ETH_VM431 1492 0
00068 ;
00069 START [EMAIL PROTECTED]
00070 START HIPR1
00071 ;
