> >Don't do the manual commands. Instead attach the tape to maint, define >stor to at least 64 meg and enter the command SERVICE ALL. After the >service has been applied, enter PUT2PROD ALL. These 2 commands do all >necessary things. > >The single pretty complicated VMSES commands were necessary on older vm >releases. >
ok - finally getting back to this. on my second level VM 4.4 I used the command SERVICE ALL 181 182 183 184 and PUT2PROD and let it run - it had one problem running out of space on CF1, so I had to delete an old CPLOAD module and rerun PUT2PROD which then finished successfully. I IPLed after PUT2PROD and VM came back up (this is second level.) Q CPLEVEL still reports 403 ... ? Also, I am still puzzled about whether this service is really on or not because NETSTAT LEVEL reports this: VM TCP/IP Netstat Level 440 IBM 2086; z/VM Version 4 Release 4.0, service level 0403 (64-bit), VM TCP/IP Lev el 440; RSU 0401 running TCPIP MODULE E1 dated 01/12/06 at 14:51 but the documentation that came with the RSU tapes says it should be LVL 0601 is there another step that i am missing? prg Phillip Gramly Systems Programmer Communications Data Group Champaign, IL
