Dave, Yes ...
<<< snip >>> TAPE 4115 ATTACHED TO RMSMASTR 4115 TAPE 4115 DETACHED BY RMSMASTR FSMSMS3203I RMSMASTR is running <<< snip >>> is normal and to be expected when the RMSMASTR serverice machine is initialized ... JR (Steven) Imler CA Senior Software Engineer Tel: +1 703 708 3479 Fax: +1 703 708 3267 [EMAIL PROTECTED] > -----Original Message----- > From: The IBM z/VM Operating System > [mailto:[EMAIL PROTECTED] On Behalf Of KEETON Dave * OR SDC > Sent: Monday, October 15, 2007 01:55 PM > To: [email protected] > Subject: Installing RMSONLY component of DFSMS/VM > > I recently installed the RMSONLY component of DFSMS/VM to allow me > access to our 3495. Things looked like they're installed, but I'm > missing some things and or things don't work as they should. > I tried to > install everything using the defaults specified in the > Program Directory > for DFSMS/VM FL221. > > I can't issue any DFSMSRM commands. I can look at HELP all > day long, but > when trying the steps outlined in the Customization manual, I can't > issue the command DFSMSRM QUERY LIBRARY OPSTATE. It tells me Unknown > CP/CMS command. I've tried to issue the command as both MAINT & DFSMS. > None of the DFSMSRM commands appear to be available to me. > The DGTVAUTH > DATA file lists DFSMS as being authorized. > > When the RMSMASTR server is started, it appears to find the drive > assigned but does the following: > > TAPE 4115 ATTACHED TO RMSMASTR 4115 > TAPE 4115 DETACHED BY RMSMASTR > FSMSMS3203I RMSMASTR is running > > > I can't determine if ATTACHED and then immediately DETACHED > is normal or > not. My understanding is there is a tape in the drive. > > When I completed the installation of the RMS component, I > noticed later > that I didn't do steps 16 & 17 of the installation (rebuilding the CMS > Help File). Can this be causing a problem? > > Thanks in advance, > > Dave > >
