My VMFPLCD SCAN is what I use to check if an envelope contains service for e.g. CP, CMS, or ...
Following the VMFREC, you issue VMAPPLY PPF ZVM CP and VMFBLD PPF ZVM CP (SERVICED 2008/1/9, clifford jackson <[EMAIL PROTECTED]>: > > James, I got the following when I ran the VMFREC PPF ZVM (ENV VPTF4385, > it seems to work. > > > Ready; T=0.01/0.01 > 15:34:58 > VMFREC PPF ZVM CP (ENV > VPTF4385 > VMFREC2760I VMFREC processing > started > VMFREC1852I Volume 1 of 1 of COR ENVELOPE created on 18 September > 07 > VMFREC1851I (1 of 3) VMFRCAXL processing > AXLIST > VMFRCX2159I Loading 4 part(s) to DELTA 2D2 > (F) > VMFRCX2193I Appending new Apply list HCPVM $APPLIST to the existing list > on > DELTA 2D2 > (F) > VMFRCX2193I Appending new Exclude list HCPVM $EXCLIST to the existing list > on > DELTA 2D2 > (F) > VMFREC1851I (2 of 3) VMFRCPTF processing > PARTLST > VMFRCP2159I Loading 18 part(s) to DELTA 2D2 > (F) > VMFREC1851I (3 of 3) VMFRCCOM processing > DELTA > VMFRCC2159I Loading 244 part(s) to DELTA 2D2 > (F) > VMFREC2189I Updating Requisite table 5VMCPR10 SRVREQT, Description > table > 5VMCPR10 SRVDESCT and Receive Status table 5VMCPR10 SRVRECS > with 18 > new PTFs from COR > 7918 > VMFREC2760I VMFREC processing completed > successfully > Ready; T=12.32/13.18 > 15:35:32 > > > > Date: Wed, 9 Jan 2008 09:13:13 -0500 > > From: [EMAIL PROTECTED] > > Subject: Re: Applying Service (PTF) > > To: [email protected] > > > > How about: VMFREC PPF ZVM CP (ENV VPTF4385 > > > > -----Original Message----- > > From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On > Behalf Of Kris Buelens > > Sent: Wednesday, January 09, 2008 2:39 AM > > To: [email protected] > > Subject: Re: Applying Service (PTF) > > > > > > The problem is surely not related to missing ACCESS commands. > > > > I would try to have a look at the VPTFnnnn file: > > VMFPLCD SCAN * * ENV= VPTF4385 SERVLINK A (EOD > > If VMFPLCD is unhappy, VMSES will not work. > > > > I tried the VMFINFO command on one of my COR enveloppes too and I get > the same error. The reason I can imagine is that VMFINFO understands only > installation "tapes", not COR "tapes"; installation tapes can be a real > product tape, or a tape with preventive maintenance; they share the same > format. > > > > > > > > I am trying to apply a PTF to my z/VM 5.1 system > > > > > > I received the PTF from an IBM FTP site, I received three files: > > > > > > ftp4385.txt รจ I received this as an ASCII file > > > > > > The next two files were defined as binary f 1024 > > > vlst4385.bin > > > vptf4385.bin > > > > > > Next I FTPed the above files to my z/VM system in the same above > > > format > > > > > > After getting them to my test VM system I DETERSE the files using the > > > following syntax: 'DETERSE VLST4385 BIN A VLST4385 SERVLINK A' > > > 'DETERSE VPTF4385 BIN A VPTF4385 SERVLINK A' > > > > > > NOTE: No errors here. > > > > > > I get errors when I try to install the product envelop. > > > > > > When I enter the following command I get the following error message: > > > 'VMFINS INSTALL INFO (NOMEMO ENV VPTF4385' > > > > > > VMFINS2767I Reading VMFINS DEFAULTS B for additional options > > > VMFINST2760I VMFINS processing started VMFMHR2737E Tape does not > > > contain a table of contents VMFINST2760I VMFINS processing completed > > > unsuccessfully Ready(00100); T=0.15/0.17 12:56:54 > > > > > > > > > When I enter the following command I get the following error message: > > > 'VMFINS INSTALL INFO (NOMEMO ENV VLST4385' > > > > > > VMFINS2767I Reading VMFINS DEFAULTS B for additional options > > > VMFINS2760I VMFINS processing started DMSWPD0002E File * * not found > > > VMFMHR1965E The command, VMFPLC SCAN * * (DISK, failed with return > code 28 > > > VMFINS2760I VMFINS processing completed unsuccessfully > > > Ready(00100); T=0.20/0.22 12:57:02 > > > > > > I followed the directions carefully but I missed something..... > > > > > > > -- > > Kris Buelens, > > IBM Belgium, VM customer support > > -------------------------------------------------------- > -- Kris Buelens, IBM Belgium, VM customer support
