And another finer point (a finer finer point?) Your CPU ID may not be what you think it is. Get the value from Q CPUID - columns 2 through 8. The LPAR number gets thrown in there.
One of mine: q cpuid CPUID = FF06784A20948000 Ready; T=0.01/0.01 15:43:58 So I put 06784A in the system netid file. Don't forget to resave CMS after updating the file on both your MAINT 490 and 190 disks (if you don't put it on the 490 PUT2PROD will copy the wrong one to your 190 next time you do maintenance). Marcy Cortes "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Thursday, February 07, 2008 3:37 PM To: [email protected] Subject: Re: [IBMVM] RSCS and TCPNJE Question On Thursday, 02/07/2008 at 06:28 EST, "Harding, Mike" <[EMAIL PROTECTED]> wrote: > I think you need to look at your system netid file. Do an "Identify" and see > what's returned. That's what sendfile uses to determine the name of your > network machine (where to send the file being sent). It should be > the name of > your rscs machine, but it looks as though it's returning "tcpip". To put a finer point on it, a SYSTEM NETID file must have at least one entry if you want to use RSCS: nnnnnn MYNODE RSCS nnnnnn is your CPU ID. MYNODE (whatever you decide it is) must be configured in RSCS as the local NJE node name. RSCS is the user ID of the RSCS virtual machine. This is where IDENTIFY gets its information. To wit: TCPMAINT AT MYNODE VIA RSCS 2008-02-07 18:35:28 EST THURSDAY Alan Altmark z/VM Development IBM Endicott
