Okay, with that hint I've found it documented in the HCD User's Guide under "Manage s/390 microprocessor IPL attributes".
Thanks. Brian Nielsen On Tue, 12 Feb 2008 13:12:35 -0700, Jerry Whitteridge <[EMAIL PROTECTED]> wrote: >In HCD on z/OS (not sure about the z/VM HCD) Option 2.11 > >Place an I against the processor you wish to work with. This will bring >up a panel where you can see the current settings and set the >dynamically changed ones. > >Jerry Whitteridge >Safeway Inc >925 951 4184 > > >> -----Original Message----- >> From: The IBM z/VM Operating System >> [mailto:[EMAIL PROTECTED] On Behalf Of Brian Nielsen >> Sent: Tuesday, February 12, 2008 11:15 AM >> To: [email protected] >> Subject: LPAR dynamic Load Address & Load Parameter >> >> In a LOAD profile for an LPAR where you define a Load Address >> and a Load >> Parameter there are check boxes for each field to use >> dynamically changed >> values for them. >> >> I've searched numerous manuals related to IOCP & HCD for both >> VM and z/OS >> and the HMC & SE for z9's, but have not turned up anything >> which describes >> *how* to dynamically change the Load Address and Load >> Parameter values. >> I've only found references that an LPAR needs Dynamic I/O >> Authority to be >> able to do it. >> >> Can anyone point me to a reference that describes how? >> >> Brian Nielsen
