Brian, when you say 'bounced the VM lpar'...did you deactivate and activate the LPAR? Something we found that for some reason takes a lot of Xstore is VDISKs...do you use them regularly? Mary Anne (PSU '85)
On Mon, Feb 25, 2008 at 10:48 AM, Brian France <[EMAIL PROTECTED]> wrote: > Folks, > Back in Oct or so we installed new z9's with added storage and > IFL's. BUT, since we were under the gun we chose to just get us up as were > and add storage and or IFL later. So our VM system had 4g of central and > 1.5 of expanded. Well, a couple of months later I went to the HMC and > added 4g more to central and another 1.5 to expanded for a total of 8g > central and 3g expanded. Bounced the VM lpar and it did indeed show via q > stor a value of 8g and q xstore 3072m. We've had cause to bounce ALL our > lpars several times since, even adding stor to z/OS. We've always say 4-5 > hours after a boot of VM consumed 99% of our xstore and I could see paging > to dasd as well. This was before and after the added storage. This morning > we needed to IML the frame and since that was done we've NOT moved at all > from central to expanded. My question is one of - was I really not getting > the added storage to VM until and IML was done? IF so, then where does the > info come from for the "q store and q xstore" commands? > > Brian W. France > Systems Administrator (Mainframe) > Pennsylvania State University > Administrative Information Services - Infrastructure/*S* YSA RC > Rm 25 Shields Bldg., University Park, Pa. 16802 > 814-863-4739 > [EMAIL PROTECTED] > > "To make an apple pie from scratch, you must first invent the universe." > > Carl Sagan > > > > >
