Colin,
If you get everything "hooked" to UM32029 (pre's, co's, etc.) for DFSMS/VM you
should have it (or just get the current SDO).
JR (Steven) Imler
CA
Senior Software Engineer
Tel: +1 703 708 3479
Fax: +1 703 708 3267
[EMAIL PROTECTED]
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf
Of Colin Allinson
Sent: Tuesday, February 26, 2008 03:36 AM
To: [email protected]
Subject: Re: DFSMS/RMS question
"Les Geer " <[EMAIL PROTECTED]> wrote :-
> A 3140 reason code does mean 'device is not available'. Typically
> though this is not an RMS problem. The quickest way to find out would
> be query the drive, and if 'FREE', then try attaching the drive
outside
> of RMS to see if that is successful. Generally there is a reason why
> RMS could not attach the drive. If the drive was not available during
> RMS initialization, RMS will later try to initialize and use the
> device. You should not have to restart RMS.
> This all assumes you are current with RMS service. Latest RMS
> service does not require the drive to be free to query it (with
> corresponding CP service).
Les,
One of the first things I tried was to query the drive (it was FREE)
then ATTACH to myself and DETACH.
As I said in my reply to JR, I can perform RMS queries (and mounts)
successfully on this drive on another system (not at the same time ;-) ).
For CP we are at V5R3.0 at RSU0702 so that should not be the problem. I
thought we were reasonably up to date on DFSMS service but I will check. Is
there a particular APAR that needs to be present to indicate the required
service level?
Colin Allinson
Technical Manager - VM Systems Support
Operating Systems Services
Amadeus Data Processing GmbH
www.amadeus.com <http://www.amadeus.com/>
IMPORTANT - CONFIDENTIALITY NOTICE - This e-mail is intended only
for the use of the individual or entity shown above as addressees . It may
contain information which is privileged, confidential or otherwise protected
from disclosure under applicable laws . If the reader of this transmission is
not the intended recipient, you are hereby notified that any dissemination,
printing, distribution, copying, disclosure or the taking of any action in
reliance on the contents of this information is strictly prohibited. If you
have received this transmission in error, please immediately notify us by reply
e-mail or using the address below and delete the message and any attachments
from your system .
Amadeus Data Processing GmbH
Geschäftsführer: Eberhard Haag
Sitz der Gesellschaft: Erding
HR München 48 199
Berghamer Strasse 6
85435 Erding
Germany
