Hi Peggy,
First thank you for all your help I really appreciate it.
Basically once I got the filename correct and added the PASSWORD for the
TCPMAINT 198 disk I was able to get the OBEYFILE command to work. I did
receive an error on my first good try. It was balking about the MTU size
being invalid. I was using 16384. I changed it to 1500 and tried the
OBEYFILE command again and it worked.
I noticed on the NETSTAT displays that the MTU actually was 32768 with a
Frame Size of 4096. I used a HIPERSOCKETS device that was GENed with
CHPARM=40. So basically it did not use the MTU size that I had defined
in the PROFILE TCPIP.
Anyway I was able to PING the z/OS LPAR from the z/VM LPAR. My next step
is to set up the HiperSockets connection in the z/Linux guest.
Stay tuned I will probably have a couple questions along the way!!
Thanks again, Terry
Thanks.. Terry
Terry Martin
Lockheed Martin - CITIC
z/OS Performance and Tuning
(410) 786-0386 - Office
(443) 632-4191 - Cell
[EMAIL PROTECTED]
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Peggy Williams
Sent: Thursday, June 05, 2008 9:15 AM
To: [email protected]
Subject: Re: HiperSockets Setup
Terry,
The message
DTCOBE005E Unable to read file 'Filename Filetype filemode'
means that it cannot read your configuration file for some reason. Do
you have the correct filename, filetype and filemode?
Peggy Williams
607-429-4063
z/VM - TCP/IP Development
Inactive hide details for "Martin, Terry R. (CMS/CTR) (CTR)"
<[EMAIL PROTECTED]>"Martin, Terry R. (CMS/CTR) (CTR)"
<[EMAIL PROTECTED]>
"Martin, Terry R. (CMS/CTR) (CTR)" <[EMAIL PROTECTED]>
Sent by: The IBM z/VM Operating System <[email protected]>
06/04/2008 04:44 PM
Please respond to
The IBM z/VM Operating System <[email protected]>
To
[email protected]
cc
Subject
HiperSockets Setup
Hi
I am setting up HIPERSOCKETS for the first time and I am dealing with
the syntax of the TCPIP PROFILE for the first time. I am using the
HIPERSOCKETS Implementation Guide Red Book to walk through this. I made
the changes to the PROFILE TCPIP and the SYSTEM DTCPARMS file. I am
trying to do the OBEYFILE PROFILE TCPIP and I am receiving a DTCOBE005E
error message. I assume it is some kind of syntax error in the PROFILE
but I cannot find the description of the error message. Anyone know
where I might find it?
Thanks.. Terry
Terry Martin
Lockheed Martin - CITIC
z/OS Performance and Tuning
(410) 786-0386 - Office
(443) 632-4191 - Cell
[EMAIL PROTECTED]
