Did you give the stgadmin RACF auths to your 2d lvl ? Alain Benveniste
Le 13/06/08 17:07, « HOWARD MCCORKLE » <[EMAIL PROTECTED]> a écrit : > Hi Les, The IUCV statements in the profiles for RMSMASTR and VMTEST are > present and I've added RMSMASTR to the DGTVAUTH DATA file, still no > luck. My ESM is RACF, but this issue does not happen in the first level. > > -----Original Message----- > From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On > Behalf Of Les Geer (607-429-3580) > Sent: Thursday, June 12, 2008 1:28 PM > To: [email protected] > Subject: RMSMASTR FSMKIN1100E Error from communication function 24, > return > >> Has anyone run into the following running a DFSMSRM command from a >> second >> >> level z/vm? and what corrected it? >> FSMKIN1100E Error from communication function 24, return code = 15 >> >> Situation: >> First level z/VM 5.2.0 runs VM:Tape and RMSMASTR connected to a VTS. >> 2nd level z/VM 5.2.0 just RMSMASTR connected to same VTS. >> No problems with first level. 2nd level (VMTEST) in cms mode can run >> commands okay. RMSMASTR appears to initialize (attach then detach tape >> drive without errors) in 2nd level. Is there some sort of virtual ctc >> needed between the 1st and 2nd level? > > This is an IUCV error, the 15 indicates an authorization failure. > Do you have IUCV ALLOW in the RMSMASTR directory on the second level > system? RMSMASTR second level and first level are not aware of each > other nor do they communicate with each other. > > In addition, the RMSMASTR directory should probably have: > IUCV *IDENT RESANY BLOBAL REVOKE > > Best Regards, > Les Geer > IBM z/VM and Linux Development > > > "Email Firewall" made the following annotations. > ------------------------------------------------------------------------------ > > Warning: > All e-mail sent to this address will be received by the corporate e-mail > system, and is subject to archival and review by someone other than the > recipient. This e-mail may contain proprietary information and is intended > only for the use of the intended recipient(s). If the reader of this message > is not the intended recipient(s), you are notified that you have received this > message in error and that any review, dissemination, distribution or copying > of this message is strictly prohibited. If you have received this message in > error, please notify the sender immediately. > > ============================================================================== >
