Thanks Scott,
BTW, do we have to change any SES service control files or do we just create
these over ride files?
My thinking and from what I got from the manual is that Dirmaint will look for
any other files which are named CONIIG* DATADVH and apply them in reverse
order...
Thanks.
>>> "Wandschneider, Scott" <[EMAIL PROTECTED]> 6/19/2008 5:04 PM >>>
Here is Mine:
CONFIG00 DATADVH A1 V 80 Trunc=80 Size=10 Line=0 Col=1 Alt=0
====>
|...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....>
00000 * * * Top of File * * *
00001 DATAMOVE_MACHINE= DATAMOVE * *
00002 ONLINE= IMMED
00003 PW_INTERVAL_FOR_GEN= 83 90
00004 PW_INTERVAL_FOR_SET= 1
00005 PW_LOCK_MODE= AUTOMATIC
00006 PW_MIN_LENGTH= 6
00007 PW_WARN_MODE= AUTOMATIC
00008 RUNMODE= OPERATIONAL
00009 SORT_BY_DEVICE_ADDRESS= YES
00010 SORT_DIRECTORY= YES
00011 * * * End of File * * *
Thank you,
Scott R Wandschneider
Senior Systems Programmer
Infocrossing, a WIPRO Company
11707 Miracle Hills Dr.
Omaha, NE 68154
Office 402.963.8905
________________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of
Howard Rifkind
Sent: Thursday, June 19, 2008 3:55 PM
To: [email protected]
Subject: Re: Dirmaint Start Up Problem.
Thanks Mike.
We were able to get Dirmaint at least to start working by reworking the config
datadvh file.
Would anyone on the list have an sample over ride file I can use as an example
which I could use to make changes to the real config dvhdata file.
I never created any such over ride file before.
If you could give me a sample over ride file, would you be good enough to email
it to me off list.
Thanks.
>>> Mike Walter <[EMAIL PROTECTED]> 6/18/2008 5:20 PM >>>
Howard,
I little more on your 2nd level DIRMAINT test...
I found the uncompiled rexx source for the DVFPROF EXEC in the 5VMDIR30
disk 02B1. At line 626, it contains comments, followed by code to do
it:
/*!--------------------------------------------------------------------*
/*! Release and detach non-required disks. *
/*! (A disk is not required if it is linked R/O *
/*! and has not been accessed yet.) *
/*!--------------------------------------------------------------------*
It appears that something is preventing DIRMAINT from getting its R/W link
to the 192 and 21F disks, and then DVHPROF detaches them.
That's an area of interests, but does not explain why DIRMAINT does not
find the DVHUPDIR MODULE on its 191 disk. Answering that should get you
closer.
Are you sure that the source system from which you are DDRing these disks
had a successful PUT2PROD DIRM?
Mike Walter
Hewitt Associates
Any opinions expressed herein are mine alone and do not necessarily
represent the opinions or policies of Hewitt Associates.
The information contained in this e-mail and any accompanying documents may
contain information that is confidential or otherwise protected from
disclosure. If you are not the intended recipient of this message, or if this
message has been addressed to you in error, please immediately alert the sender
by reply e-mail and then delete this message, including any attachments. Any
dissemination, distribution or other use of the contents of this message by
anyone other than the intended recipient is strictly prohibited. All messages
sent to and from this e-mail address may be monitored as permitted by
applicable law and regulations to ensure compliance with our internal policies
and to protect our business. E-mails are not secure and cannot be guaranteed to
be error free as they can be intercepted, amended, lost or destroyed, or
contain viruses. You are deemed to have accepted these risks if you communicate
with us by e-mail.
_____________
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail by anyone else is unauthorized.
If you are not an addressee, any disclosure or copying of the
contents of this E-mail or any action taken (or not taken) in
reliance on it is unauthorized and may be unlawful. If you are not an
addressee, please inform the sender immediately, then delete this
message and empty from your trash.
_____________
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail by anyone else is unauthorized.
If you are not an addressee, any disclosure or copying of the
contents of this E-mail or any action taken (or not taken) in
reliance on it is unauthorized and may be unlawful. If you are not an
addressee, please inform the sender immediately, then delete this
message and empty from your trash.
