/dev/disk/by-path/ccw-0.0.8002-part1 The /dev/dasd?1 will still work. Just annoyingly can move if you add disks. In fact, if you are upgrading from sles9 to sles10 you're going to want to have it that anyway since SLES9 uses /dev/disk/by-path/ccw-0.0.8006p1 and the upgrade process won't find that (boo hiss).
Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Thomas Kern Sent: Tuesday, August 12, 2008 10:26 AM To: [email protected] Subject: Re: [IBMVM] Safety Reminder: If you are planning disk upgrades, make sure you switch your Linux guests to by-path IDs in /etc/fstab BEFORE you switch I have been using /dev/dasd?1 where ? goes from a to zz. Is by-path the /dev/disk/0.0.0591 syntax? /Tom Kern On Tue, 12 Aug 2008 12:11:43 -0500, Adam Thornton <[EMAIL PROTECTED] et> wrote: > >*I* suggest using the /dev/disk/by-path filename. (I think RH is /dev/ >dasd/by-path). > >Change it with your favorite text editor in /etc/fstab *and* in /etc/ >zipl.conf, and don't forget to rerun zipl! > >Adam >========================= ========================== ========================
