Mike,
Here is a list of the zSeries processors:
# Model
2064 z900
2066 z800
2084 z990
2086 z890
2094 z9-EC (enterprise class)
2096 z9-BC (business class)
2097 z10-EC
2098 z10-BC
So a 2084 is a z990 and not a z900.
Doug Breneman z/VM Development IBM Endicott, NY
From: "Horlick, Michael" <[EMAIL PROTECTED]>
To: [email protected]
Date: 11/12/2008 01:36 PM
Subject: Re: CP Entered; Disabled Wait PSW 9025
Hi Ron,
I think we were on a 2084 (is that a z900?). We also got screwed up a
bit because we had our sysres pack with the same volser (520RES) as the
floor system.
The last time I had problems IPLing a system at Sungard was when we were
at VSE 2.6.1 and I didn't have the fixes in to run on a newer processor.
Luckily they had an older machine to use.
Regards,
Mike (Long live CGI, comrade!)
-----Original Message-----
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On
Behalf Of Ron Schmiedge
Sent: November 12, 2008 1:03 PM
To: [email protected]
Subject: Re: CP Entered; Disabled Wait PSW 9025
Hi Mike,
Perhaps not too strange - what processor were you using at Sungard?
There may have been service required for that particular machine that
came on 0701 you did not have at 0601.
We had that happen to us at Sungard several years back (I can't recall
the error messages anymore, we were getting abends soon after IPL) and
they were able to put us on an older machine which made the abends go
away. We had to put a service pack on our VM before the next test!
Ron
On Wed, Nov 12, 2008 at 10:40 AM, Horlick, Michael
<[EMAIL PROTECTED]> wrote:
> Hello David,
>
> Thanks for the info. Had trouble replying to e-mail when at disaster
> recovery site.
>
> Sungard got it fixed for us when they copied their CPLOAD MODULE to
our
> MAINT CF1 disk. We are at "z/VM Version 5 Release 2.0, service level
> 0601 (64-bit)" and they were at service level 0701.
>
> They said it happened before to another one of their clients.
>
> Strange.
>
> Mike
>
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On
> Behalf Of Wakser, David
> Sent: November 10, 2008 3:20 PM
> To: [email protected]
> Subject: Re: CP Entered; Disabled Wait PSW 9025
>
> Here is the output from the manual:
>
> David Wakser
>
>
>
> MSG HCP9025W All Help Information
line
> 1 of 38
> (c) Copyright IBM Corporation 1990, 2007
>
>
>
> HCP9025W SYSTEM TERMINATION COMPLETE, ENTERING WAIT STATE
>
>
>
> Explanation: The system termination process has completed. The
system
> will
> not restart for one of the following reasons:
>
>
>
> 1. An error was detected in the error recovery hardware or
> software.
>
