Hello again,
My client has come back with the following: We are using Onweb Client that is using HTTP protocol. I found something about this and i think we should use Buffered instead of WSF. I'll do the necessary change to make the Transfer mode = Buffered by default for the users and test it. http://msdn.microsoft.com/en-us/library/ms731913.aspx It appears that specifying a "buffered transfer" works but a "write structured field" does not. Mike ________________________________ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Horlick, Michael Sent: November 13, 2008 2:39 PM To: [email protected] Subject: Re: IND$FILE fails through CA-TPX and TCP/IP for VM Hello Ed, I tried NSX32705 and still the same. The D4B3290 logmode seems to work fine for everything but PC file to CMS. More testing... Mike ________________________________ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Edward M Martin Sent: November 13, 2008 2:27 PM To: [email protected] Subject: Re: IND$FILE fails through CA-TPX and TCP/IP for VM Hello Mike, IND$FILE needs the extended data stream to be set in the DLOGMOD. SNX32705 is an SNA 3270 with extended data stream. Typically TCP/IP is uses a non-SNA logmode. Try NSX32705 or NSX32702 in ISTINLCM. Ed Martin Aultman Health Foundation 330-588-4723 ext 40441 ________________________________ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Dodds, Jim Sent: Thursday, November 13, 2008 11:51 AM To: [email protected] Subject: Re: IND$FILE fails through CA-TPX and TCP/IP for VM I remember I had a similar problem about 15 years ago when first started using this a new job. The problem was that there is a bit set in the logmode for file transfer to be able to use or not use. Check the logmode you are currently using and see if that could be the problem. Jim Dodds Systems Programmer Kentucky State University 400 East Main Street Frankfort, Ky 40601 502 597 6114 ________________________________ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Horlick, Michael Sent: Thursday, November 13, 2008 10:17 AM To: [email protected] Subject: IND$FILE fails through CA-TPX and TCP/IP for VM Greetings, My client is moving away from SNA to TCP/IP. We use CA-TPX as our session manager and the client uses a terminal emulator called 'Proclient OnWeb Web to Host'. They use IND$FILE and are getting error - TRANS13 when uploading a file from their PC to their CMS A-disk. It doesn't happen to them when native VM and it doesn't happen doing a download from the mainframe to the PC. I use myExtra! and under TPX I have no problems. They have no problems if using SNA. I specified the following in VM/VTAM. My SCEXIT does a DIAL to VTAM for any IP terminals connected to port 23 TC070 LOCAL CUADDR=070,TERM=3277,USSTAB=USSTCPIP,FEATUR2=EDATS, * LOGAPPL=TPX,MODETAB=ISTINCLM,DLOGMOD=D4B3290 I think when they connect via SNA they get a DLOGMOD of SNX32705. Has this happened to anyone else? Any suggestions? Thanks, Mike
