Change the RR link mode to one that allows Write access (W, M, EW , etc) and
the method is fixed. That or 'ACCESSM0 ON' followed by 'ACC F2CC W (MODE0'
Regards,
Richard Schuh
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf
Of Wandschneider, Scott
Sent: Friday, November 21, 2008 6:29 AM
To: [email protected]
Subject: Re: Moving Maint's 2CC Drive C
This *is* true, I did not think of that as I don't use mode "0" much.
Scott R Wandschneider
Senior Systems Programmer|| Infocrossing, a Wipro Company || 11707
Miracle Hills Drive, Omaha, NE, 68154-4457|| ': 402.963.8905 || Ë:847.849.7223
|| :: [EMAIL PROTECTED] **Think Green - Please print responsibly**
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf
Of RPN01
Sent: Friday, November 21, 2008 8:20 AM
To: [email protected]
Subject: Re: Moving Maint's 2CC Drive C
Note that the method described below will miss any W0 files that might
have been on the original disk. If you use mode 0 files at all, then this is
NOT a good method of enlarging a minidisk.
--
Robert P. Nix Mayo Foundation .~.
RO-OE-5-55 200 First Street SW /V\
507-284-0844 Rochester, MN 55905 /( )\
----- ^^-^^
"In theory, theory and practice are the same, but
in practice, theory and practice are different."
On 11/20/08 2:15 PM, "Wandschneider, Scott" <[EMAIL PROTECTED]> wrote:
The method I Use to increase any Minidisk is:
As MAINT
change the mindisk entry for 2CC to F2CC
add a new larger 2CC
put the directory online
link * F2CC F2CC RR
Acc F2CC W
link * 2CC 2CC MW
format 2CC C#1#MNT2CC
Copy * * W = = C (OLDDATE
rel w (det
delete the directory entry for F2CC
Put the directory online
Done
Scott R Wandschneider
Senior Systems Programmer|| Infocrossing, a Wipro Company ||
11707 Miracle Hills Drive, Omaha, NE, 68154-4457|| ': 402.963.8905 ||
Ë:847.849.7223 || :: [EMAIL PROTECTED] **Think Green - Please print
responsibly**
________________________________
From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED]
On Behalf Of Howard Rifkind
Sent: Thursday, November 20, 2008 2:01 PM
To: [email protected]
Subject: Moving Maint's 2CC Drive C
I'm out of space on MAINT's 2CC drive where the directory is
located.
I need to create a new 2CC.
I plan to create a 3CC, copy all members over to the 3CC from
the 2CC, delete the old 2CC, Create a new 2CC and copy all the members back to
the 2CC from the 3CC.
Are there any other issues I should be aware of?
Thanks.
_____________
LEGAL NOTICE
Unless expressly stated otherwise, this message is confidential
and may be privileged. It is intended for the addressee(s) only.
Access to this E-mail by anyone else is unauthorized.
If you are not an addressee, any disclosure or copying of the
contents of this E-mail or any action taken (or not taken) in
reliance on it is unauthorized and may be unlawful. If you are
not an
addressee, please inform the sender immediately, then delete
this
message and empty from your trash.
