Here SMF CONTROL is RECFM F LRECL 100. So maybe:
Link to RACFVM 191:
VMLINK RACFVM 191
COPYFILE SMF CONTROL fm = = A (LRECL 100
XEDIT SMF CONTROL A
Verify 1 *
overtype RAC by RACFSMF
FILE
SENDFILE SMF CONTROL A RACFVM
SET SECUSER RACFVM *
CP SEND CP RACFVM Q RDR * CLASS A (note the spool file nbr
CP SEND RACFVM EXEC RECEIVE nnnn (REPLACE
Done, ready, no need to recycle RACF.
But, as now you probably will have SMF data on RACF 301 and 302, you
should manually XAUTOLOG RACFSMF to make it cleanup.
2009/3/23, Martin, Terry R. (LOCKHEED MARTIN Performance
Engineering/CTR) (CTR) <[email protected]>:
> Hi
>
> I was able to issue the command as you pointed out but received an error
> when it tried to autolog the RACFSFM machine. When I look at the SMF
> CONTROL file I see the following:
>
> CURRENT 301 K PRIMARY 301 K SECONDARY 302 K 10000 LVA1 CLOSE 001 SEVER
> NO
> 0 RAC
>
> Note that RAC should be the name of the machine (RACFSMF) to be auto
> logged but whenever I try to change it to RACFSMF it truncates back to
> RAC. Any suggestions?
>
>
>
> Thank You,
>
> Terry Martin
> Lockheed Martin - Information Technology
> z/OS & z/VM Systems - Performance and Tuning
> Cell - 443 632-4191
> Work - 410 786-0386
> [email protected]
>
> -----Original Message-----
> From: The IBM z/VM Operating System [mailto:[email protected]] On
> Behalf Of Kris Buelens
> Sent: Monday, March 23, 2009 9:50 AM
> To: [email protected]
> Subject: Re: SMSG to RACFVM to do SMF SWITCH
>
> You need to be authorized in CSTCONS. This file tells not only who
> RACFVM must send messages too, but also who can send SMSG commands to
> it. It is an ASSEMBLER file, but the standard ASSEMBLE coimmand can
> still compile it into CSTCONS TEXT.
> Don't tell the enemy: OPERATOR is by default in the file, hence CP
> SEND CP OPERATOR SMSG RACFVM xxxx will work
>
> 2009/3/23 Martin, Terry R. (LOCKHEED MARTIN Performance
> Engineering/CTR) (CTR) <[email protected]>:
> > Hi
> >
> >
> >
> > I am testing gout the RACFSMF SMF switching process and I want to
> issue the
> > SMF SWITCH command to RACFVM. When I try to issue the SMSG RACFSM SMF
> SWITCH
> > it tells me that in this case that my MAINT user id does not have the
> > authority to issue the SMSG. What do I need to set this authority and
> is the
> > command correct to switch the SMF data set. I did try to logon to
> RACFVM
> > directly to do this but had no luck.
> >
> >
> >
> > Thank You,
> >
> >
> >
> > Terry Martin
> >
> > Lockheed Martin - Information Technology
> >
> > z/OS & z/VM Systems - Performance and Tuning
> >
> > Cell - 443 632-4191
> >
> > Work - 410 786-0386
> >
> > [email protected]
> >
> >
>
>
>
> --
> Kris Buelens,
> IBM Belgium, VM customer support
>
--
Kris Buelens,
IBM Belgium, VM customer support
