The following was pulled from the VM service tips page at
http://www.vm.ibm.com/service/tips/



   How to handle a missing PTF requisite during SERVICE processing.
   If SERVICE fails due to a missing PTF requisite you need to do the
   following to recover and restart SERVICE. The commands that follow are
   an example if you are applying service that you received electronically
   as a servlink envelope file. If using tape you would not use ENV on the
   VMFREC command and you would have to enter in the SERVICE RESTART
   command that appeared on the VMF2310W message from the original SERVICE
   failure.

      Order the missing requisites
      Issue the following commands from MAINT to receive the missing
      requisite PTFs you ordered. You will have to supply the compname for
      those PTFs. If you have more than one component in your missing
      requisite order you will have to repeat the following commands for
      each component.
      -     VMFSETUP SERVP2P compname (LINK
      -     VMFREC PPF SERVP2P compname ( ENV reqenvfilename
      Now you should be able to restart the original SERVICE that failed.
      -     SERVICE RESTART orgenvfilename

Gregory L Dyrda


                                                                           
             "Wandschneider,                                               
             Scott"                                                        
             <Scott.Wandschnei                                          To 
             d...@infocrossing.         [email protected]             
             com>                                                       cc 
             Sent by: The IBM                                              
             z/VM Operating                                        Subject 
             System                    VM 5.4 Maintenance                  
             <[email protected]                                             
             ARK.EDU>                                                      
                                                                           
                                                                           
             03/27/2009 04:58                                              
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
               The IBM z/VM                                                
             Operating System                                              
             <[email protected]                                             
                 ARK.EDU>                                                  
                                                                           
                                                                           





Can someone tell me how to correct VMFAPP2100E?

VMFAPP2760I VMFAPPLY PROCESSING STARTED

VMFAPP2106I APPLY LIST HCPVM CONTAINS 2 PTFS THAT NEED TO BE APPLIED AND 7
PTFS THAT ARE ALREADY APPLIED
VMFAPP2100E PTF UM32620 COULD NOT BE APPLIED BECAUSE PTF UM32520 HAS NOT
BEEN RECEIVED
VMFAPP2102I 2 OF 2 PTFS PROCESSED

VMFAPP2105I VMFAPPLY PROCESSING COMPLETED UNSUCCESSFULLY.



Scott R Wandschneider

-----------------------------------------
******************************************************************
This E-mail is confidential. It may also be legally privileged. If
you are not the addressee you may not copy, forward, disclose or
use any part of it. If you have received this message in error,
please delete it and all copies from your system and notify the
sender immediately by return E-mail.

Internet communications cannot be guaranteed to be timely, secure,
error or virus-free. The sender does not accept liability for any
errors or omissions.
******************************************************************
SAVE PAPER - THINK BEFORE YOU PRINT!

Reply via email to