As Kris already mentioned, the root cause is not the Shared File System.
The first message you describe does not exist. It appears that you
actually meant message: HCPWRS2509E
z/VM is great with keeping message help online. From any VM userid,
enter: Help msg HCPwrs2509E
(where you only need to enter the uppercase letters in that "Help" command
above)
On our z/VM 5.4.0 system is responds:
---<snip>---
MSG HCPWRS2509E All Help Information line 1
of 40
(c) Copyright IBM Corporation 1990, 2008
HCP2509E Spool file control data error {,CCPV CCCCPPVV|on volume volser,
BLOCK blkno}
Explanation: This spool file has bad control information. If the device
is a
CKD or ECKD, the CCCCPPVV variable is the cylinder (CCCC), page (PP), and
volume (VV). If the device is an FBA, the volser variable is the label
specified in the SYSOWN list and the blkno variable identifies in
hexadecimal
the block number where the spool file in error is located. The spool file
is
scheduled to be deleted.
This could be caused by one of the following:
o The CPVOL list may have been reordered, leaving spool volumes at
different
relative positions on the list.
o The WARMSTART cylinders (CKD/ECKD devices) or pages (FBA devices) may
have
been overwritten.
o Some portion of spool space may have been overwritten, corrupting the
spool map pages.
o A volume with the same name as the valid spool volume may have been
picked
up by the system, in place of the proper volume.
This error could also occur for system data files that will also be
scheduled
for deletion.
System Action: System operation continues temporarily. If the file in
error
is known, it is identified in message HCP2510E, which is issued after
this
message.
When the preliminary phase of spooling initialization is complete, spool
file
summary status is displayed, and system initialization can be stopped at
operator request.
Operator Response: Report this error condition to your system support
personnel.
---<snip>---
Since you _appear_ to be relatively early in the installation, I can only
offer questions and suggestions.
1- (explaining the first bullet in the help message above)
Did you change the SLOT numbers of SPOOL volumes on the SYSOWN list
inside the "SYSTEM CONFIG" file
on MAINT's CF1, CF2, or CF3 disks?
sugg: One should NEVER change slot numbers for SPOOL volumes in "SYSTEM
CONFIG" without first making
a complete SPOOL backup using SPXTAPE. Changing SPOOL volume SLOT
numbers already causes loss of
SPOOL files including System Data Files (SDFs - critical for saved
systems like CMS) at the next IPL.
Only SPOOL volumes suffer from this fate. Read the SYSTEM CONFIG
doc carefully. Experiment on 2nd level
z/VM guests systems.
2- (explaining the 2nd and 3rd bullets on the help message above)
Did you manually change/add a minidisk in SYSTEM DIRECT (without
benefit of some product like DIRMAINT)?
sugg: Don't delete IBM provided userids or minidisks mapped by IDs
$SPOOL$, $xxxx$, etc.
If not running DIRMAINT, then ALWAYS run DISKMAP or DIRMAP before
and after disk changes to ensure
that there are no unexpected lines containing the word "OVERLAP".
3- (the 4th help message bullet is pretty self-explanatory).
Mike Walter
Hewitt Associates
"Tony Bergenza" <[email protected]>
Sent by: "The IBM z/VM Operating System" <[email protected]>
08/12/2009 07:31 AM
Please respond to
"The IBM z/VM Operating System" <[email protected]>
To
[email protected]
cc
Subject
spool vol
Hi
we unload the vm 5.4 ddr successfully and finding the problem with spool
file with the message
hcpwrs250e spoll file control date error ccpv 00465f91
hcpwrs2510e spool file unknown file will be deleted..
When enter "q limit all " to run the sevice tape it give the following
message:
dmsqrqqq5e e file pool vmsys not availbale or unknown
all the 3 server vmservs, vmservr, vmservu are up now .
Pls held
Regards
Tony
The information contained in this e-mail and any accompanying documents may
contain information that is confidential or otherwise protected from
disclosure. If you are not the intended recipient of this message, or if this
message has been addressed to you in error, please immediately alert the sender
by reply e-mail and then delete this message, including any attachments. Any
dissemination, distribution or other use of the contents of this message by
anyone other than the intended recipient is strictly prohibited. All messages
sent to and from this e-mail address may be monitored as permitted by
applicable law and regulations to ensure compliance with our internal policies
and to protect our business. E-mails are not secure and cannot be guaranteed to
be error free as they can be intercepted, amended, lost or destroyed, or
contain viruses. You are deemed to have accepted these risks if you communicate
with us by e-mail.
