I don't see either NUCXDROP or NUCXLOAD modules on my 5.4 RSU802. -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Marcy Cortes Sent: Tuesday, September 08, 2009 11:56 AM To: [email protected] Subject: Re: NUCXDROP
Don't have one on either a 902 system or a 901 system. No longer have any 801 systems to check. The command still works though. Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Jim Bohnsack Sent: Tuesday, September 08, 2009 9:51 AM To: [email protected] Subject: [IBMVM] NUCXDROP I install maintenance, RSU 0902 at the moment, on a 2nd lvl system and then move it to the test and production lpars. When getting ready to move CMS, I compare the 2nd lvl 190 disk with the old 190 disks on the lpars. On the 2nd lvl system with z/VM 5.4 at RSU0902, there is no NUCXDROP MODULE. It's on the test and production lpars running z/VM 5.4 at the level it was installed last fall, RSU0801, I guess. Could someone else take a look if you've installed 0902 on z/VM 5.4 and see if you've got it. Did I just do a "whoops" with the maintenance? Jim -- Jim Bohnsack Cornell University (972) 596-6377 home/office (972) 342-5823 cell [email protected]
