I just went through this a couple of weeks ago and had the same oddities. I bet its looking at the wrong filepoolid. Spell it out in the command.
________________________________ From: The IBM z/VM Operating System on behalf of Frank M. Ramaekers Sent: Thu 3/4/2010 2:24 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Adding minidisk to SFS in Multi-User Mode I believe that this is the first time I've tried this and have run into the following problem. I'm on the first step "Enter the FILEPOOL MINIDISK command". I've added the following to the directory: USER VMSERVA PARROT 32M 32M BG : ; *MINIOPT NOMDC MDISK 0101 3390 0031 0040 540W03 WR RCATALOG WCATALOG MDISK 0201 3390 1200 0400 540W04 WR RDATAA WDATAA MDISK 0202 3390 1200 0400 540W05 WR RDATAA WDATAA MDISK 0203 3390 1200 0400 540W06 WR RDATAA WDATAA And the current VMSYSA POOLDEF has: MAXUSERS=1000 MAXDISKS=200 DDNAME=CONTROL VDEV=A01 DDNAME=LOG1 VDEV=B01 DDNAME=LOG2 VDEV=B02 DDNAME=BACKUP DISK FN=CONTROL FT=BACKUP FM=A DDNAME=MDK00001 VDEV=101 GROUP=1 BLOCKS=7184 DDNAME=MDK00002 VDEV=201 GROUP=2 BLOCKS=71915 DDNAME=MDK00003 VDEV=202 GROUP=2 BLOCKS=71915 FILEPOOL execution: filepool minidisk vmserva DMSWFP3485I FILEPOOL processing begun at 13:11:26 on 4 Mar 2010. DMSJMD3425R Enter MDK number (nnnnn), virtual device address (vvvv), DMSJMD3425R and storage group number (ggggg) for a minidisk to be added. DMSJMD3425R Use format nnnnn vvvv ggggg 00004 0203 00002 DMSJMD3909E DDNAME = MDK00004 is out of sequence DMSWFP3486I FILEPOOL processing ended at 13:11:33 on 4 Mar 2010. Ready(03909); T=0.01/0.01 13:11:33 I don't see why MDK00004 is out of sequence (the last MDISK is MDK00003). Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
