Well I'm guessing it can't. I have the following in my TCPIP PROFILE:
DEVICE OSA1 LCS 600
;
LINK OSA1LNK ETHERNET 0 OSA1
;
ARPAGE 5
;
HOME
10.1.1.93 OSA1LNK
;
GATEWAY
10.1.1.1 = OSA1LNK 1500 HOST
DEFAULTNET = OSA1LNK 1500 0
;
TRANSLATE
;
START OSA1
And I get the following in the TCPIP console log:
DTCPRI385I Device OSA1:
DTCPRI386I Type: LCS, Status: Not started
DTCPRI387I Envelope queue size: 0
DTCPRI388I Address: 0600
I change it to this:
DEVICE OSA1 OSD 600
;
LINK OSA1LNK QDIOETHERNET 0 OSA1
;
ARPAGE 5
;
HOME
10.1.1.93 OSA1LNK
;
GATEWAY
10.1.1.1 = OSA1LNK 1500 HOST
DEFAULTNET = OSA1LNK 1500 0
;
TRANSLATE
;
START OSA1
And I get the following:
DTCPRS007E Error encountered in reading PROFILE TCPIP *:
DTCPAR123I Line 237: Invalid type field
DTCPAR123I Line 239: LINK statement: Invalid type field
DTCPAR123I Line 244: Unknown link name in HOME cmd
DTCPAR123I Line 247: Unknown link name in GATEWAY cmd
DTCPAR123I Line 252: Device not found
Line 237 corresponds to my DEVICE statement and line 239 is the LINK statement.
600 -
602 is attached to my TCPIP on the VM/ESA 2.40 guest and I have NICDEF and
GRANT for
the VMEASA240 guest in z/VM
Unless anyone can point out something obivious I'm going to chalk this up to
experience.
Thanks,
Billy
On 17 Mar 2010 at 10:13, The IBM z/VM Operating System wrote:
> Hello,
>
> Would VM/ESA running 2nd level under z/VM be able to use the VSWITCH?
>
>
> Thanks,
>
> Billy
