Oh, I know I can...I've made some changes recently (DELETE DEVICE).
q configmode System is not in configuration mode Use SET CONFIGMODE to turn configuration mode on or off. Configuration mode a machine state that is used to change your I/O configuration dynamically. You can use this command to issue a group of dynamic I/O commands together. Otherwise, each command enters and exits configuration mode at the beginning and ending of each dynamic I/O command. Frank M. Ramaekers Jr. ________________________________ From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Davis, Larry (National VM/VSE Capability) Sent: Tuesday, June 15, 2010 1:21 PM To: [email protected] Subject: Re: Dynamic I/O question Try SET CONFIGMODE ON and see if you can do Dynamic configuration Larry Davis From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Frank M. Ramaekers Sent: Tuesday, June 15, 2010 2:09 PM To: [email protected] Subject: Dynamic I/O question Okay, the person that put together our IOCP made an error in the following: CHPID PATH=(11),PCHID=113,TYPE=OSE,SHARED CNTLUNIT CUNUMBR=0111,PATH=(11),UNIT=OSA IODEVICE ADDRESS=(5AB0,012),CUNUMBR=(0111),UNIT=OSA,UNITADD=00 IODEVICE ADDRESS=5ABF,CUNUMBR=(0111),UNIT=OSAD,UNITADD=FE The PCHID should be 111 instead of 111. Therefore there are no devices defined on this CHPID: HCPQDV1003E 5AB0-5ABF was not found. The CHIPID is there but offline: q chpid 11 No devices on path 11 I tried deleting the CHPID, but I get: cp delete chpid 11 HCPCCO6806E Dynamic I/O change request for channel path failed with return code 010B Ready(06806); T=0.01/0.01 13:06:33 Okay, this states "You tried to delete a channel path, but this channel path still has one or more control units defined for it.". So, I tried deleting the CU: cp delete cu 0111 HCPCCO6806E Dynamic I/O change request for control unit failed with return code 010B Ready(06806); T=0.01/0.01 13:08:19 What am I missing? Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE & RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected]. _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected].
