Can you point me in the direction of what would be needed to do that? It was functional before our last IPL, and our z/VM expert isn't available. On Wed, Jun 30, 2010 at 2:41 PM, McBride, Catherine <[email protected]>wrote:
> Your VSWITCH state should be READY rather than just DEFINED. > > > ------------------------------ > *From:* The IBM z/VM Operating System [mailto:[email protected]] *On > Behalf Of *Daniel Tate > *Sent:* Wednesday, June 30, 2010 2:30 PM > > *To:* [email protected] > *Subject:* Cannot reach the outside world > > Again, sorry for my lack of knowledge here. We're working through > several issues at my workplace. The current problem is while the guests > can speak to one another via tcp, and the route entry is present, the router > will not respond to pings, and i cannot contact the "outside world". Is > there a specific user that has to be logged in to route out? is there > something wrong with the vswitch definitions below? > > also, is there a "quick and dirty" guide to z/VM? I'm from the distributed > world, and would like a quick reference.. unfortunately answers arent as > easy to find on the internet about z/VM as they are about windows or linux > or any of the myriad other unixes i've worked on; sort of a short and to the > point book like the "exam cram" type or perhaps "An idiots guide to z/VM". > > 00: CP Q VSWITCH > 00: VSWITCH SYSTEM VSW1 Type: VSWITCH Connected: 3 Maxconn: INFINITE > 00: PERSISTENT RESTRICTED NONROUTER Accounting: OFF > 00: VLAN Unaware > 00: MAC address: 02-00-01-00-00-01 > 00: State: Defined > 00: IPTimeout: 5 QueueStorage: 8 > 00: RDEV: 03A0.P00 Controller: NONE > 00: RDEV: 03C0.P00 Controller: NONE >
