Has the z/OS guest been Granted access?
When you logon onto the guest do you see the virtual nic being created and
connecting to the vswitch?

On Tue, Aug 10, 2010 at 10:54 AM, Neale Ferguson <[email protected]>wrote:

> I have a z/OS 1.9 guest whose TCPIP is attempting to activate an OSA
> connection to a vSwitch. It starts activating but stays in this state:
>
> IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
> IST087I TYPE = LEASED             , CONTROL = MPC , HPDT = YES
> IST1954I TRL MAJOR NODE = OSATRL1
> IST1715I MPCLEVEL = QDIO       MPCUSAGE = SHARE
> IST1716I PORTNAME = ADM1ETP    LINKNUM =   0   OSA CODE LEVEL = F4F2
> IST1577I HEADER SIZE = 4096 DATA SIZE = 0 STORAGE = ***NA***
> IST1221I WRITE DEV = 0401 STATUS = ACTIVE     STATE = ONLINE
> IST1577I HEADER SIZE = 4092 DATA SIZE = 0 STORAGE = ***NA***
> IST1221I READ  DEV = 0400 STATUS = ACTIVE     STATE = ONLINE
> IST1221I DATA  DEV = 0402 STATUS = OPEN.PEND  STATE = N/A
> IST1724I I/O TRACE = OFF  TRACE LENGTH = *NA*
> IST1717I ULPID = TCPIP
> IST1815I IQDIO ROUTING DISABLED
> IST1500I STATE TRACE = OFF
> IST314I END
>
> On the z/VM (5.4 0901) side I see:
>
> VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 3    Maxconn: INFINITE
> PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF
> VLAN Unaware
> MAC address: 02-00-00-00-00-02
> State: Ready
> IPTimeout: 5         QueueStorage: 8
> Isolation Status: OFF
> Portname: ADM1ETP    RDEV: 1340.P00 Controller: DTCVSW2  VDEV:  1340
> VSWITCH Connection:
> RX Packets: 13         Discarded: 0          Errors: 0
> TX Packets: 410        Discarded: 0          Errors: 0
> RX Bytes: 1299                 TX Bytes: 58526
> Device: 1340  Unit: 000   Role: DATA       vPort: 0001  Index: 0001
> Unicast IP Addresses:
> 172.17.16.5          MAC: 08-00-20-D9-99-58 Remote
> :
> :
> Adapter Owner: ZOS19    NIC: 0400.P00 Name: UNASSIGNED
> RX Packets: 0          Discarded: 0          Errors: 0
> TX Packets: 0          Discarded: 0          Errors: 0
> RX Bytes: 0                    TX Bytes: 0
> Device: 0402  Unit: 002   Role: DATA       vPort: 0066  Index: 0066
>
> Eventually it times out with the following message:
>
> 00- 08.51.16 STC00349  EZZ4310I ERROR: CODE=8010302E REPORTED ON DEVICE
> -  ADM1ETP. DIAGNOSTIC CODE: 03
> - 08.51.16 STC00349  EZZ4315I DEACTIVATION COMPLETE FOR DEVICE ADM1ETP
>
> Looking up the IP and SNA codes manual 8010302e is interpreted as:
>
> Permanent error with LLC layer not being able to register its home address
>
> As a z/OS neophyte, I'm not sure what is missing from my config. The TCPIP
> definition is:
>
> DEVICE ADM1ETP  MPCIPA NONROUTER
> LINK OSDL    IPAQENET ADM1ETP
>
> Neale
>



-- 
Mark D Pace
Senior Systems Engineer
Mainline Information Systems

Reply via email to