Hi,
I have defined my TCPIP over an Layer2 VSWITCH and it is working,
but the netstat home command doesnt show the connected VSWITCH.
netstat home
VM TCP/IP Netstat Level 610 TCP/IP Server Name: TCPIP
IPv4 Home address entries:
Address Subnet Mask Link VSWITCH
------- ----------- ------ -------
172.16.145.68 <none> LVIPA68 <none>
10.1.97.196 <none> L09COW81 <none>
Why is this not displayed correctly ?
The display of my vswitch
q vswitch vsw0 det
VSWITCH SYSTEM VSW0 Type: VSWITCH Connected: 1 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
VLAN Unaware
MAC address: 02-00-04-00-00-01
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
RDEV: 0100.P00 VDEV: 0100 Controller: DTCVSW2
VSWITCH Connection:
RX Packets: 4172 Discarded: 0 Errors: 0
TX Packets: 5158 Discarded: 0 Errors: 0
RX Bytes: 294432 TX Bytes: 2289862
Device: 0100 Unit: 000 Role: DATA vPort: 0001 Index: 0001
Unicast IP Addresses:
10.1.97.193 MAC: 00-07-EC-76-A4-00 Remote
Adapter Connections:
Adapter Owner: TCPIP NIC: 0220.P00 Name: UNASSIGNED
RX Packets: 44748 Discarded: 0 Errors: 0
TX Packets: 17544 Discarded: 5 Errors: 0
RX Bytes: 16525439 TX Bytes: 7150427
Device: 0220 Unit: 000 Role: DATA vPort: 0065 Index: 0065
Options: Ethernet Broadcast
Unicast MAC Addresses:
02-00-04-00-00-05
Multicast MAC Addresses:
01-00-5E-00-00-01
33-33-00-00-00-01
33-33-FF-00-00-05
But the ifconfig - command shows the correct output
ifconfig
L09COW81 inet addr: 10.1.97.196 mask: 255.255.255.240
UP MTU: 8992
vdev: 0220 type: QDIO ETHERNET portname: UNASSIGNED
transport type: ETHERNET MAC address: 02-00-04-00-00-05
ipv6: ENABLED
VSWITCH name: VSW0
cpu: 0 forwarding: ENABLED ipv4 path MTU discovery: DISABLED
RX bytes: 17959521 TX bytes: 7719150
IPv6 Addresses:
FE80:0:0:0:0:4FF:FE00:5
Mit freundlichen Grüßen/ Kind regards,
Alexander Riedel
Systeme Mainframe
Finanz Informatik Technologie Service
Witschelstraße 81
90431 Nürnberg
Tel: +49 89 94511-9244
www.f-i-ts.de<http://www.f-i-ts.de>
