Okay, but I don't understand this either?
***** 08/27/10 *****
09:26:39 DTCOSD360I VSWITCH-OSD link added for VSWAILT181DDEV
09:26:39 DTCOSD080I VSWITCH-OSD initializing:
09:26:39 DTCPRI385I Device VSWAILT181DDEV:
09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Not started
09:26:39 DTCPRI387I Envelope queue size: 0
09:26:39 DTCPRI497I Address: 181D Port Number: 0
09:26:39 DTCOSD310E VSWITCH-OSD device VSWAILT181DDEV: Missing or
incorrect required port name
09:26:39 DTCOSD082E VSWITCH-OSD shutting down:
09:26:39 DTCPRI385I Device VSWAILT181DDEV:
09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Inoperative
09:26:39 DTCPRI387I Envelope queue size: 0
09:26:39 DTCPRI497I Address: 181D Port Number: 0
OSA 181D DETACHED DTCVSW2 181D BY DTCVSW2
OSA 181E DETACHED DTCVSW2 181E BY DTCVSW2
OSA 181F DETACHED DTCVSW2 181F BY DTCVSW2
09:26:39 DTCOSD361I VSWITCH-OSD link removed for VSWAILT181DDEV
09:26:39 DTCOSD360I VSWITCH-OSD link added for VSWAILT1200DEV
09:26:39 DTCOSD080I VSWITCH-OSD initializing:
09:26:39 DTCPRI385I Device VSWAILT1200DEV:
09:26:39 DTCPRI386I Type: VSWITCH-OSD, Status: Not started
09:26:39 DTCPRI387I Envelope queue size: 0
09:26:39 DTCPRI497I Address: 1200 Port Number: 0
09:26:39 DTCQDI001I QDIO device VSWAILT1200DEV device number 1200:
09:26:39 DTCQDI007I Enabled for QDIO data transfers
09:26:39 DTCOSD238I ToOsd: IPv4 multicast support enabled for
VSWAILT1200DEV
09:26:39 DTCOSD319I ProcessSetArpCache: Supported for device
VSWAILT1200DEV
09:26:39 DTCOSD341I Obtained MAC address 00145EB77AC5 for device
VSWAILT1200DEV
09:26:39 DTCOSD238I ToOsd: IPv6 multicast support enabled for
VSWAILT1200DEV
Frank M. Ramaekers Jr.
________________________________
From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of Marcy Cortes
Sent: Friday, August 27, 2010 9:49 AM
To: [email protected]
Subject: Re: Defining VSWITCH difficulties
Any additional messages on DTCVSW2's console?
________________________________
From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of Frank M. Ramaekers
Sent: Friday, August 27, 2010 7:39 AM
To: [email protected]
Subject: [IBMVM] Defining VSWITCH difficulties
I'm attempting to define a new VSWITCH:
define vswitch vswailt rdev 181d 1200 portname osa181d osa1200
VSWITCH SYSTEM VSWAILT is created
Ready; T=0.01/0.01 09:26:39
HCPSWU2832E Connection 181D.P00 for VSWITCH SYSTEM VSWAILT is not
active.
HCPSWU2832E Device is detached from DTCVSW2.
HCPSWU2830I VSWITCH SYSTEM VSWAILT status is ready.
HCPSWU2830I DTCVSW2 is VSWITCH controller for device 1200.P00.
But, I don't see what the problem is with 181D (through 181F):
q vswitch
VSWITCH SYSTEM VSWAILT Type: VSWITCH Connected: 0 Maxconn: INFINITE
PERSISTENT RESTRICTED NONROUTER Accounting: OFF
VLAN Unaware
MAC address: 02-00-01-00-00-0D
State: Ready
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF
Portname: OSA181D RDEV: 181D.P00 Controller: NONE Error:
Detached
Portname: OSA1200 RDEV: 1200.P00 Controller: DTCVSW2 VDEV: 1200
:
:
q paths 181d
Device 181D, Status ONLINE
CHPIDs to Device 181D (PIM) : 90
Physically Available (PAM) : +
Online (LPM) : +
Legend + Yes - No
Ready; T=0.01/0.01 09:30:21
cp q 181d-181f
OSA 181D FREE , OSA 181E FREE , OSA 181F FREE
Ready; T=0.01/0.01 09:38:15
The error message HCPSWU2832E doesn't give me much to go on. Any
ideas?
Frank M. Ramaekers Jr.
Systems Programmer
MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Co.
Phone: (254)761-6649
1200 Wooded Acres Dr.
Fax: (254)741-5777
Waco, Texas 76701
_____________________________________________________ This message
contains information which is privileged and confidential and is solely
for the use of the intended recipient. If you are not the intended
recipient, be aware that any review, disclosure, copying, distribution,
or use of the contents of this message is strictly prohibited. If you
have received this in error, please destroy it immediately and notify us
at [email protected].
_____________________________________________________
This message contains information which is privileged and confidential and is
solely for the use of the
intended recipient. If you are not the intended recipient, be aware that any
review, disclosure,
copying, distribution, or use of the contents of this message is strictly
prohibited. If you have
received this in error, please destroy it immediately and notify us at
[email protected].
