Hi Ashwin,

Establish a R/O link from MAINT as vadr to that E102 and then enter:
cpfmtxa vadr DVPAGA allocate
This will read the allocation map directly from the volume without the
risk to disturb it.

I do not believe that your z/VM 6.1 would not recognize allocation
records if they were written correctly and also did never made any
negative experience with DDR and COPY ALL. For 2nd level systems I do
quite often what you did.
So probably the mother disk was not initialized correctly during the
basic installation process.

Best wishes,
Wolfgang

________________________________

From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of Bhemidhi, Ashwin
Sent: Friday, November 19, 2010 4:53 PM
To: [email protected]
Subject: Re: Page volume not recognized after IPL



Our PAGE volume is in the CP OWNED list and it is attached to the
system. It just that VM does not recognize any allocation on the PAGE
volume.



DASD E102 DVPAGA 3390 CKD-ECKD (UNITS IN CYLINDERS)

     TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000

     PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000

     SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000

     DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000



And this PAGE was initiated as a part of the vm 6.1 installation PACK.
We did recently migrate the DASD from one Storage sub system to a new
storage system. I just DDR'ed 'copy all' the volumes and relabeled the
new sysres, shutdown and re'ipled on the new storage. Do I have manually
reinitialized the PAGE volumes, will DDR copy all not copy the
allocation table.



Thank you,

Ashwin

________________________________

From: The IBM z/VM Operating System [mailto:[email protected]] On
Behalf Of Kris Buelens
Sent: Friday, November 19, 2010 9:15 AM
To: [email protected]
Subject: Re: Page volume not recognized after IPL



If -at IPL time- a volume is included in the CP OWNED list, it is
attached to SYSTEM automatically.

At runtime: when you ATTACH a disk to SYSTEM, CP will verify if it is in
the CP OWNED list.

In any case, at ATTACH TO SYSTEM time: for disks in the CP OWNED list,
and only for those, CP will read the ALLOC map to see what it can use
(PAGE, SPOOL, etc).

2010/11/19 George Henke/NYLIC <[email protected]>

Also it must be ATTACHED to SYSTEM.

I had a problem recognizing my second page pack at level 2 because it
was not attached to level 2 as SYSTEM.

q dev# and/or q dasd volser should show its attach status,





[email protected]
Sent by: The IBM z/VM Operating System <[email protected]>

11/19/2010 06:40 AM

Please respond to
The IBM z/VM Operating System <[email protected]>

To

[email protected]

cc



Subject

Re: Page volume not recognized after IPL










Hello, Ashwin:
For the dasd to be recognized it must be formated AND allocated as PAGE
with CPFMTXA, AND must be defined as Owned into SYSTEM CONFIG.
Is the DVRESB a new Page dasd?
To check dynamically, use these commands:

CP DEFine CPOWN SLOT 6 DVRESB
followed by other CP QUERY ALLOC

If the Query shows the page area, the problem is in the SYSTEM CONFIG.
If not, the problem was with CPFMTXA.
______________________________________________
Clovis

From:

"Bhemidhi, Ashwin" <[email protected]>

To:

[email protected]

Date:

19/11/2010 07:26

Subject:

Page volume not recognized after IPL

Sent by:

The IBM z/VM Operating System <[email protected]>



________________________________




We have recently ipl'ed one of our test z/VM 6.1 system off the our
alternate sysres pack. The system does not seem to recognize the page
volume. Is there something I did not configure?

I am ready to add another page volume to make sure that it does not
ABEND due to lack of page space. I will check the allocation on the PAGE
volume after I add some PAGE DASD.

Thank you,
Ashwin Bhemidhi

q alloc page
               EXTENT     EXTENT  TOTAL  PAGES   HIGH    %
VOLID  RDEV      START        END  PAGES IN USE   PAGE USED
------ ---- ---------- ---------- ------ ------ ------ ----
*         *          -          -      0      0      0   0% NOT FOUND
Ready; T=0.01/0.01 03:07:31



q alloc
DASD E100 DVRESA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000020 INUSE=00000000002 AVAIL=00000000018, ACTIVE
DASD E101 DVSPLA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000003338 INUSE=00000001775 AVAIL=00000001563
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E102 DVPAGA 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E103 DVW01A 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
DASD E104 DVW02A 3390 CKD-ECKD (UNITS IN CYLINDERS)
    TDISK TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    PAGE  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    SPOOL TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
    DRCT  TOTAL=00000000000 INUSE=00000000000 AVAIL=00000000000
IPL NUCLEUS ACTIVE ON VOLUME DVRESA


q cpowned
Slot  Vol-ID  Rdev  Type   Status
  1  DVRESA  E100  Own    Online and attached
  2  DVSPLA  E101  Own    Online and attached
  3  DVPAGA  E102  Own    Online and attached
  4  DVW01A  E103  Own    Online and attached
  5  DVW02A  E104  Own    Online and attached
  6  ------  ----  -----  Reserved
  7  ------  ----  -----  Reserved
  8  ------  ----  -----  Reserved
  9  ------  ----  -----  Reserved
 10  ------  ----  -----  Reserved

q e100-e105
DASD E100 CP OWNED  DVRESA   78
DASD E101 CP OWNED  DVSPLA   1
DASD E102 CP OWNED  DVPAGA   0
DASD E103 CP OWNED  DVW01A   118
DASD E104 CP OWNED  DVW02A   52
DASD E105 DVRESB





--
Kris Buelens,
IBM Belgium, VM customer support


Software AG - Group Executive Board: Karl-Heinz Streibich 
(Vorsitzender/Chairman), Arnd Zinnhardt, Mark Edwards, David Broadbent, Josef 
Bommersbach, Dr. Wolfram Jost, Kamyar Niroumand, Ivo Totev

Sitz/Registered office: Uhlandstra?e 12, 64297 Darmstadt, Germany, - 
Registergericht/Commercial register: Darmstadt HRB 1562 - Vorstand/ Management 
Board: Karl-Heinz Streibich (Vorsitzender/Chairman), David Broadbent, Dr. 
Wolfram Jost, Arnd Zinnhardt; - Aufsichtsratsvorsitzender/ Chairman of the 
Supervisory Board: Dr. Andreas Bereczky - http://www.softwareag.com/

Reply via email to