Yes, you're right. Will wait till network people are involved. 
 
Thanks,
 
Mike

________________________________

From: The IBM z/VM Operating System on behalf of Alan Altmark
Sent: Wed 15/12/2010 10:29 AM
To: [email protected]
Subject: Re: Problems with MPROUTE going from z800 to z9BC computer



On Wednesday, 12/15/2010 at 08:21 EST, "Horlick, Michael"
<[email protected]> wrote:

> Come migration time however, we could not get the VIPA/MPROUTE
functionality
> working. I could not ping from within the mainframe to anything beyond
the OSA
> card. Tried both QDIO and non-QDIO mode.
> Our TCP/IP stack, no problems.
>
> We had to back out and now we have to try to set up a test VIPA/MROUTE
setup
> and try it on the new machine. Waiting on the telecom architect for
this.
>
> No changes to the configuration files were done (except for QDIO in the
> PROFILE  TCPIP, but the same configuration files for non-QDIO).
>
> Any clues what could have gone wrong?

Mike, network problems are all solved the same way: Divide and Conquer. If
I understand you correctly:

1.  The new system and the old one have the same IP configuration.  That
is, the same files on TCPIP and MPROUTE's A-disks.  The same configuration
files on TCPMAINT 198.  The systems even have the same SYSTEM_IDENTIFIER.
2.  The new system works fine *until* you bring up MPROUTE (it throws away
any static routes not specifically marked as permanent).
3.  The old and new systems are NOT up at the same time.

When you PING something, a packet goes out and a packet comes back.  To
resolve why PING doesn't work, you need to figure out which of those two
things didn't happen.  Your network techs can help you, as they do this
kind of stuff all the time with sniffers and queries on the
switches/routers.

Only then will you be able to take corrective action.  Prior to that,
you're just guessing, flailing at the problem in the hope you will
accidentally fix it.

Alan Altmark

z/VM and Linux on System z Consultant
IBM System Lab Services and Training
ibm.com/systems/services/labservices
office: 607.429.3323
[email protected]
IBM Endicott

Reply via email to