Nice. Thanks. ____________________ James R. Hughes TSG, Problem Solver NH Department of Information Technology 603-271-5586(w); 603-491-3071(c) www.nh.gov/doit
"Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system." It is fun to do the impossible. -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Tom Duerbusch Sent: Wednesday, January 05, 2011 3:03 PM To: [email protected] Subject: Re: Dynamically adding 3390's I would think that if this DS8100 was already being used by this box, then the CHPID and PATHs are already defined. If this is a new controller for you, then you need to do the DEFINE for the controller using the existing paths. In all cases, you would have to do the DEFINE device(s) for the new volumes. Then, you can vary on the devices and be off and running. When done, be sure to update your IOCP and put it in the next slot. Otherwise a Power On Reset, will loose any dynamically defined IOCP stuff. Tom Duerbusch THD Consulting >>> "Frank M. Ramaekers" <[email protected]> 1/5/2011 1:57 PM >>> See DEFINE CHPID|PATH|CU|DEVICE statements. Frank M. Ramaekers Jr. -----Original Message----- From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf Of Hughes, Jim Sent: Wednesday, January 05, 2011 1:42 PM To: [email protected] Subject: Dynamically adding 3390's We want to define a new controller for some new dasd volumes on our DS8100. Our Z/OS z10 system has them defined and is working with them quite nicely. Our z890 z/VM system doesn't have them in its IOCP. I've checked the z/VM system using CP Q DYN STAT and discovered it does allow dynamic io reconfiguration. So, my question is how do I get the new dasd online to z/VM? It will use existing paths to the DS8100. There are 8 devices on this new path. I've never done this sort of thing to a running system and have a certain respect for keeping it up and working. Experimenting is not an option for me. Thanks in advance for hints, tips, and an education. ____________________ James R. Hughes TSG, Problem Solver NH Department of Information Technology 603-271-5586(w); 603-491-3071(c) www.nh.gov/doit "Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system." It is fun to do the impossible. _____________________________________________________ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at [email protected].
