Yes, you’ll have to change those too. Change the real address. You can leave the virtuals alone
(On the attach the virtual is the second address, on the DEDICATE it s the first – in case you didn’t know that ☺ ) Marcy This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of George Henke/NYLIC Sent: Friday, February 04, 2011 2:12 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] z196 lb4ul tyvm, Marcy: Our device numbers are also changing from 9000s to 9400s in the new IODF gen. Will our OSA SY80TEST ATTACH 9030 (below) no longer work, or is it virtual and ok? OSA 9200 ATTACHED TO SY80TEST 9030 DEVTYPE OSA CHPID 12 OSD q osa OSA 9000 ATTACHED TO TCPIP 9000 DEVTYPE OSA CHPID D4 OSD OSA 9001 ATTACHED TO TCPIP 9001 DEVTYPE OSA CHPID D4 OSD OSA 9002 ATTACHED TO TCPIP 9002 DEVTYPE OSA CHPID D4 OSD OSA 9004 ATTACHED TO DTCVSW1 9004 DEVTYPE OSA CHPID D4 OSD OSA 9005 ATTACHED TO DTCVSW1 9005 DEVTYPE OSA CHPID D4 OSD OSA 9006 ATTACHED TO DTCVSW1 9006 DEVTYPE OSA CHPID D4 OSD OSA 903F ATTACHED TO SY92TEST 902F DEVTYPE OSA CHPID 0B OSD OSA 907F ATTACHED TO SY91TEST 906F DEVTYPE OSA CHPID 0F OSD OSA 90C0 ATTACHED TO VTAM 90C0 DEVTYPE OSA CHPID D0 OSE OSA 90D0 ATTACHED TO VTAM 90D0 DEVTYPE OSA CHPID D1 OSE OSA 9100 ATTACHED TO TCPIP 9100 DEVTYPE OSA CHPID D5 OSD OSA 9101 ATTACHED TO TCPIP 9101 DEVTYPE OSA CHPID D5 OSD OSA 9102 ATTACHED TO TCPIP 9102 DEVTYPE OSA CHPID D5 OSD OSA 9200 ATTACHED TO SY80TEST 9030 DEVTYPE OSA CHPID 12 OSD OSA 9201 ATTACHED TO SY80TEST 9031 DEVTYPE OSA CHPID 12 OSD OSA 9202 ATTACHED TO SY80TEST 9032 DEVTYPE OSA CHPID 12 OSD OSA 9203 ATTACHED TO SY79TEST 9030 DEVTYPE OSA CHPID 12 OSD OSA 9204 ATTACHED TO SY79TEST 9031 DEVTYPE OSA CHPID 12 OSD OSA 9205 ATTACHED TO SY79TEST 9032 DEVTYPE OSA CHPID 12 OSD OSA 9206 ATTACHED TO SY91TEST 9020 DEVTYPE OSA CHPID 12 OSD OSA 9207 ATTACHED TO SY91TEST 9021 DEVTYPE OSA CHPID 12 OSD OSA 9208 ATTACHED TO SY91TEST 9022 DEVTYPE OSA CHPID 12 OSD OSA 9209 ATTACHED TO SY92TEST 9020 DEVTYPE OSA CHPID 12 OSD OSA 920A ATTACHED TO SY92TEST 9021 DEVTYPE OSA CHPID 12 OSD OSA 920B ATTACHED TO SY92TEST 9022 DEVTYPE OSA CHPID 12 OSD OSA 920C ATTACHED TO SY90TEST 9020 DEVTYPE OSA CHPID 12 OSD OSA 920D ATTACHED TO SY90TEST 9021 DEVTYPE OSA CHPID 12 OSD OSA 920E ATTACHED TO SY90TEST 9022 DEVTYPE OSA CHPID 12 OSD OSA 920F ATTACHED TO SY91TEST 902F DEVTYPE OSA CHPID 12 OSD OSA 925F ATTACHED TO SY80TEST 925F DEVTYPE OSA CHPID 12 OSD OSA 9300 ATTACHED TO SY80TEST 9070 DEVTYPE OSA CHPID 13 OSD OSA 9301 ATTACHED TO SY80TEST 9071 DEVTYPE OSA CHPID 13 OSD OSA 9302 ATTACHED TO SY80TEST 9072 DEVTYPE OSA CHPID 13 OSD OSA 9303 ATTACHED TO SY79TEST 9070 DEVTYPE OSA CHPID 13 OSD OSA 9304 ATTACHED TO SY79TEST 9071 DEVTYPE OSA CHPID 13 OSD OSA 9305 ATTACHED TO SY79TEST 9072 DEVTYPE OSA CHPID 13 OSD OSA 9306 ATTACHED TO SY91TEST 9060 DEVTYPE OSA CHPID 13 OSD OSA 9307 ATTACHED TO SY91TEST 9061 DEVTYPE OSA CHPID 13 OSD OSA 9308 ATTACHED TO SY91TEST 9062 DEVTYPE OSA CHPID 13 OSD OSA 9309 ATTACHED TO SY92TEST 9060 DEVTYPE OSA CHPID 13 OSD OSA 930A ATTACHED TO SY92TEST 9061 DEVTYPE OSA CHPID 13 OSD OSA 930B ATTACHED TO SY92TEST 9062 DEVTYPE OSA CHPID 13 OSD OSA 930C ATTACHED TO SY90TEST 9060 DEVTYPE OSA CHPID 13 OSD OSA 930D ATTACHED TO SY90TEST 9061 DEVTYPE OSA CHPID 13 OSD OSA 930E ATTACHED TO SY90TEST 9062 DEVTYPE OSA CHPID 13 OSD OSA 930F ATTACHED TO SY80TEST 907F DEVTYPE OSA CHPID 13 OSD OSA 935F ATTACHED TO SY80TEST 935F DEVTYPE OSA CHPID 13 OSD Marcy Cortes <marcy.d.cor...@wellsfargo.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 02/04/2011 04:58 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z196 lb4ul Right, You would redefine it like this define vswitch lnxvsw1 rdev 9004.p01 Or play it safe and put both in there ☺ define vswitch lnxvsw1 rdev 9004.p00 9004.p01 Marcy This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of George Henke/NYLIC Sent: Friday, February 04, 2011 1:53 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] z196 lb4ul Paul, Marcy, et al: I just came from a z196 pre-install planning meeting (by phone) in which it was said that the OSA on the z/196 will be using PORT 1. We are currently using PORT 0 on our Z9. Does this mean our VSWITCH definition (below) in SYSTEM CONFIG which defaults to PORT 0 will not work on the z196 unless we code PORT 1? define vswitch lnxvsw1 rdev 9004 George Henke/NYLIC 02/01/2011 03:40 PM To The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> cc Subject Re: z196 lb4ulLink ty all very much. "Feller, Paul" <pfel...@aegonusa.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 02/01/2011 03:24 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z196 lb4ul You would be using the default which is port 0 (zero). The port number really only comes into play if you have an OSA Express3 card and are connecting to the second port or what is called the A1 port on the card layout. Paul Feller AIT Mainframe Technical Support From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of George Henke/NYLIC Sent: Tuesday, February 01, 2011 2:05 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z196 lb4ul What is the default PORT number? We do not specify PORT number in our VSWITCH definition below (from SYSTEM CONFIG): define vswitch lnxvsw1 rdev 9004 Sorry to ask: But does this mean we do not use an OSA.? Or does it mean we use a default? I think it may mean the former. Mark Post <mp...@novell.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 02/01/2011 02:50 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z196 lb4ul >>> On 2/1/2011 at 02:45 PM, George Henke/NYLIC <george_he...@newyorklife.com> wrote: > How did you change your vswitch definition for PO1? > > Chuckie has deigned use of PORTNAME in VSWITCH taboo. Port number is not the same as port name. Two different parameters entirely. Mark Post
