Forgive my ignorance, but is this all defined in the IOCP? Because the IOCP is
very generic and most of the stuff is SHARED. I don't see anything in the
current IOCP that sets any partition apart from the other. BTW, this is a z9
that's having trouble:
<snip>
IOCONFIG ID=33
ID MSG2='SYS1.IODF33 - Z9 23JAN08',SYSTEM=(7060,1), *
TOK=('M3000H30',00800001AD0E2094202540630106302F00000000*
,00000000,'06-10-29','20:25:40','SYS1','IODF99')
*
RESOURCE PARTITION=((CSS(0),(CFE1,9),(CFE2,A), +
(PART1,1),(PART2,2),(PART3,3),(PART4,4), +
(PART5,5),(PART6,6),(PART7,7),(PART8,8)))
</snip>
Dave
From: The IBM z/VM Operating System [mailto:[email protected]] On Behalf
Of [email protected]
Sent: Tuesday, June 14, 2011 8:23 AM
To: [email protected]
Subject: Re: Question regarding zVM and CF when running in a LPAR
David,
I don't have access to a Z10, so it is only speculation.
Something to check:
* Are the CF Processors dedicated to CF LPAR?
* The VM LPAR have access to at least one CF processor?
* Is VM LPAR running in Mode VM?
Follow this line...
______________________________________________
Clovis
From:
David Booher <[email protected]>
To:
[email protected]
Date:
09/06/2011 12:25
Subject:
Re: Question regarding zVM and CF when running in a LPAR
Sent by:
The IBM z/VM Operating System <[email protected]>
________________________________
Yes, I see what you see on my zVM 4.4 system running on my z800 here in
Chicago, but the z10 in the UK runs zVM in an LPAR and gives the strange
messages indicated below.
I saw Alan's response, but I'm unsure how to proceed. I know they are running
CFs in LPARs on the z10, so I don't think it's a "licensing" issue... Is it
just a matter of exposing the CF processors to the zVM LPAR? Is this a
requirement for zVM 5.3?
No, the CF inside of zVM on this z10 has never been tried before. I want to
get it working so I can test my DB2 version 10 SYSPLEX there, because DB2 won't
run on my z800 here in Chicago.
My messages are cryptic at best. I particularly like the one I got back from
trying to SEND the CF machine as message while it was "supposedly" loading.
09:40:56 XAUTOLOG CFCC4
09:40:56 COMMAND ACCEPTED
09:40:56 AUTO LOGON *** CFCC4 USERS = 16 BY OPERATOR
CFCC4 : HCPMFT2816I LOADING MESSAGE PROCESSOR CFCC4 FROM THE PROCESSOR
CONTROL
LER.
09:43:32 SEND CFCC4 HELP
CFCC4 : HCPPCX6531E THE OPERATING SYSTEM WILL NOT ACCEPT COMMANDS FROM
THE SERVICE PROCESSOR.
CFCC4 : HCPMFT2814E THE REQUEST TO LOAD CFCC4 FROM THE PROCESSOR
CONTROLLER DID NOT COMPLETE IN THE ALLOTTED TIME.
CFCC4 : HCPMFT260E IPL COMMAND PROCESSING CANNOT COMPLETE DUE TO ERRORS.
Dave Booher
Quest Software
