Re: [IC27A] Perryville, MD HELP!

Thu, 02 Apr 2009 09:09:04 -0700

I was looking for that link.  But since you have it I go to Baltimore regularly so a trip to Perryville wouldn't be bad.  And my mast is next to my boat, so I could use the experience.

Just email me letting me know when you want to do it.

-Ivan

--- On Fri, 4/3/09, Lee Scott <[email protected]> wrote:

From: Lee Scott <[email protected]>
Subject: Re: [IC27A] Perryville, MD HELP!
To: [email protected]
Date: Friday, April 3, 2009, 12:20 AM

Mike,

Are you covering a round-trip plane ticket? :-)

I stepped mine last year, and I used the instructions here at http://www.catalina27.org/SN-FTP/mastraising.jpg

It was a little scary at first, but after raising and lowering it twice to correct criss-crossed halyards, etc., it I got a lot more confident in the process.  The only thing I did different from the instructions was I used the mainsheet and fiddle blocks from my Catalina 22 to do the lifting, rather than using just a single block at the top.  That made the lifting easy enough for my wife to do it while I and a friend swung the base of the mast into place.  The only thing I'd change is I'd make the A-frame about a foot taller than they say in the instructions.  With the fiddle block at the top rather than a single block, the mast was hard up against it and as high as it would go before I had enough clearance at the base to place it on a 4x4 wooden block.

Placing it on the 4x4 wooden block lets you connect all the wiring and test it before you drop it onto the step.  Good luck!

Lee Scott

header image
LEE A. SCOTT
Shelby, AL


Mike wrote:

Hello, Group! I'm looking for somebody in the Perryville, MD area who can lend me some dockside advice. I've got a C27 I need some experienced help with, mostly in getting the mast stepped. I'm not looking for somebody to it FOR ME, just somebody to help ME DO IT. If you're in the area please drop me an email, I'm covering gas and buying drinks. I'm stuck between a rock and hard spot, your assistance is apprecitated! !!

Mike
mccom...@cox. net


Reply via email to