OK, several good suggestions to ponder. Now I just have to order a replacement for the masthead clevis pin that plinked overboard when I removed the forestay. :-)
Lee Scott '87 C-27 #6350 --- In [email protected], "Phil Agur" <pja...@...> wrote: > > A scarf jointed pair 2 x 4 x 18' with a double sided lap reinforcement on > the center 4'. The foil should be lashed on top to the 2" side. Carry from > roughly the mid point of each 2 x 4. > > > > Phil Agur > <http://www.catalina27.org/public_pages/profile270.htm> s/v Wing Tip > C270 LE #184 MMSI 366901790 > > > > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of Lee > Scott > Sent: Saturday, July 11, 2009 10:49 AM > To: [email protected] > Subject: [IC27A] Protecting foil during installation > > > > > > > > > I've just finished assembling my new Harken roller furler, and now I need to > carry it down to the dock, get it on the boat and attach it to the mast. > > How in hell do you move a floppy 36' long piece of aluminum without bending > it and ruining it in the process? Once I get it strapped to the mast, it'll > probably be OK. Getting it on the boat without kinking the foil is going to > be a problem. > > Lee Scott > '87 C-27 #6350 > > > > > > [Non-text portions of this message have been removed] >
