Hi Rob, Jeff, Here are some pictures that were taken of me rather than the table setup :-)But you'll get the general idea. Pictures were taken last year in Calais, France, during our summer holiday trip - which explains for the copious breakfast layout. Anyway, it should give you a view on the amount of things we can cram on the table. The space for my legs is just about right. I measure 1,8m, Marianne is smaller than I am, we need to compromise ... I'll take some more detailed pictures this the weekend and send them over to you! Jan.Sicut Nubes, J27. --- On Tue, 4/27/10, Jeff W <[email protected]> wrote:
From: Jeff W <[email protected]> Subject: [IC27A] Re: cockpit table?? To: [email protected] Date: Tuesday, April 27, 2010, 7:54 PM Hi Jan on the subject of a cockpit table do you have any pictures you could post to give a better idea how to do it Thank you -Jeff Sundowner 27- --- In ic...@yahoogroups. com, "RobAdkins" <robadk...@. ..> wrote: > > jan, > > can you tell me more about your mounting set up and where you got it? does > the fixed bracket chafe your leg being in that location? thanks-rob > > --- In ic...@yahoogroups. com, Jan Meeuwis <jan_meeuwis@ > wrote: > > > > Rob, > > a good place for the bracket would be in the middle under the fastener of > > the port seat hatch. You need a leg that slides into the bracket, and fits > > into the table at one of its sides. The table hence has 3 parts: bracket > > (fixed), leg and table top (separate). They can be stored easily in the > > port locker.I chose a bracket-leg combination that permits positioning the > > leg to different heights.Don' t make the table larger than the space > > between the seats, or it gets too cramped. > > Jan. > > > > --- On Mon, 4/26/10, RobAdkins <robadkins@> wrote: > > > > From: RobAdkins <robadkins@> > > Subject: [IC27A] cockpit table?? > > To: ic...@yahoogroups. com > > Date: Monday, April 26, 2010, 9:43 PM > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Â > > > > > > > > > > > > > > > > > > > > hi all, > > > > > > > > on to the next project. has anyone come across a good design for a cockpit > > table on a tiller model 27? the hardest decision is where to put the > > mounting bracket. -rob > > >
