Mau sedikit sharing tentang custom rom PICOPad GEA, hasil karya seorang teman yang tidak mau disebut :D.
Seperti biasa : DWYOR Jd sy tidak bertanggung jawab jika HH anda brick. custom rom PICOpad GEA It’s raining outside this whole evening and very boring being alone in apartment … then i made this custom rom for axioo picopad GEA model. At first I just want to make a smaller icons and fonts by increasing the dpi to 180 using ro.sf.lcd_density on build.prop only, but the night is young, so I put also another tweak based from what I always do when I build my custom rom for my own galaxy nexus.<http://www.jfdesignnet.com/?attachment_id=2495> Cooked with dsixda kitchen rom and here is the ingredients : - 6 rows x 5 columns 180 dpi lcd density - sysctl tweak for increasing internet network performance (basically it’s a common network ip4 tweak from klixs, but it is working good on my galaxy nexus custom rom) - some battery performance tweak (forgot where i get this from, only copy pasteing from my tomboy, sorry) - some dalvikvm performance tweak (forgot too where i get this from, sorry) - some gps performace tweak (from here<https://twitter.com/jfdesignnet/status/235339577236287489> ) - rooted with su, busybox, and Superuser.apk included - deodexed all apps from stock rom Here we go the custom ROM : http://ge.tt/7bz3z2S/v/0 And here is the steps to flash this custom rom to your axioo picopad GEA : *Requirement and Preparation :* - Read this thoroughly : *Your warranty is now void !!!* **I am not responsible if you brick your phone, get stuck in a bootloop, or if your phone grows arms and tries to kill you. Flash at your own risk! *Please do some research if you have any concerns about risk of flashing a custom rom before continuing! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you!!* *If you have any other objection, don’t bother to comment, just close this page!* - This custom ROM is not for noobs, it is not for faint hearted, because in this article I will not explain how to get CWM recovery for your picopad GEA. The process and tools how to get cwm recovery is somewhat winblows centric, and i don’t like either to discuss nor explain, so you must find yourself a way how to get those CWM to your device. At least, I can show you the way, here is the path to go there : http://forum.xda-developers.com/showthread.php?t=1938938 *Flashing Process :* The steps to flash this custom rom is pretty straight forward : - Download the custom rom from link above and copy it to the root of your sdcard, you may check it first with your file manager to confirm it was there. There are two sdcard storage on picopad GEA so you must know it’s at the internal sdcard or external sdcard. - Boot into clockworkmod CWM recovery mode by turning off your phone, hold down Volume + button then press power button, hold them both until you see axioo logo appear then release it. Wait a sec or two … then you’re now in cwm recovery mode, you can navigate it through the menu using volume + and – button, and to executing the menu you can press power button. - *BACKUP* your stock rom and data using nandroid backup first. - Choose *Wipe Data / Factory reset* and execute it - Choose *Wipe cache partition* and execute it - Go to *Advanced* menu, choose *Wipe Dalvik Cache* and execute it - Go back to main menu, and choose *Install Recovery from sdcard* menu and execute it - If you were put the custom rom on the internal sdcard, then choose *Install from internal sdcard*, otherwise choose *Install from external sdcard*. Navigate to the custom rom location and execute it. There will be a confirmation once again, and of course choose Yes. - After the installation completed, go back to main menu and choose *Reboot System Now* Here is the result after flash : <http://www.jfdesignnet.com/?attachment_id=2483> <http://www.jfdesignnet.com/?attachment_id=2490> <http://www.jfdesignnet.com/?attachment_id=2491> <http://www.jfdesignnet.com/?attachment_id=2492> And once more, by default, with the stock rom from this picopad GEA you will have 512Mb ROM and 2Gb Internal SDCard, which I think this is just wasting good resources. so … for you who think like me, maybe wants to swap that resource, so we can have 2Gb ROM (who was more than enough for sooo much applications) and 512Mb for the internal SDCard, with notes that you already have micro sdcard that always kept in their slot, because with only 512mb sdcard will certainly not sufficient for your multimedia needs. And here is the script<http://www.jfdesignnet.com/www.jfdesignnet.com/wp-content/uploads/2012/11/edit2GStorenroot.zip> and how it looks like on mine after flash : <http://www.jfdesignnet.com/?attachment_id=2493> <http://www.jfdesignnet.com/?attachment_id=2501> The step for flashing this script is pretty much the same as flashing the custom rom above using cwm recovery, but of course you have to do this partitioning first before flashing the custom rom. After everything set up, don’t forget to set the Preferred Install Location to your Internal SDCard. Enjoy your axioo PICOpad GEA. -- ========== Download Aplikasi Kompas versi Digital dan Keren https://play.google.com/store/apps/details?id=com.kompas.android.kec -------------------------- Download Aplikasi AR "MONSTAR" dari Indosat https://play.google.com/store/apps/details?id=com.ar.monstarunity --------------------- Samsung GALAXY SIII hanya Rp 5.965.000 di Multiply.com Super Sale! Click http://bit.ly/drogadtor ---------------------- GSM-AKU http://www.gsmaku.com - BEC Bandung E-mail: [email protected] Hp: 0881-1515151 --------------------- EceranShop http://eceranshop.com - BEC Bandung E-mail: [email protected] Hp: 0815-56599888 -------------------- Web + email + domain .web.id: 75rb / TAHUN - http://www.hostune.com -------------------- Aturan Umum ID-Android: http://goo.gl/MpVq8 Join Forum ID-ANDROID: http://forum.android.or.id ==========
