> ----------
> From: Benny L. Prijono[SMTP:[EMAIL PROTECTED]]
> Reply To: [EMAIL PROTECTED]
> Sent: 24 Desember 1998 5:24
> To: [EMAIL PROTECTED]
> Subject: Re: [id-linux] Mount failure
>
> "Zuki, Harahap (SAIC)" wrote:
> >
> > Saya ada masalah mount nih. Kalau saya coba mount sesuatu misal :
> >
> > mount localhost:/home /a, keluar error message :
> > mount clntudp_create: RPC: Port mapper failure - RPC: Unable to receive
> >
>
> portmap udah dinyalain?
====
Portmap nya mati. Setelah saya coba menjalankannya manual seperti perintah
di bawah, dia jalan beberapa saat setelah itu kalau saya check the perintah
portmap status, dia bilang :
portmap dead but subsys locked.
Kenapa ya ?
> kalo redhat:
> $ /etc/rc.d/init.d/portmap start
>
> > Kira-kira apa ya salahnya ? Saya lihat waktu start-up rpc.mountd juga,
> > errornya :
> > Unable to register (mountd, 1, udp).
> >
> > Ada yang bisa bantu ?
> >
>
> harus ngliat /var/log/messages sih biar tau tepatnya apa..
===
Ini dia :
sales02 syslogd 1.3-3: restart.
klogd 1.3-3, log source = /proc/kmsg started.
Dec 24 09:07:27 sales02 kernel: Loaded 3697 symbols from /boot/System.map.
sales02 kernel: Symbols match kernel version 2.0.35.
sales02 kernel: No module symbols loaded.
sales02 kernel: Console: 16 point font, 400 scans
sales02 kernel: Console: colour VGA+ 80x25, 1 virtual console (max 63)
sales02 kernel: pcibios_init : BIOS32 Service Directory structure at
0x000fa000
sales02 kernel: pcibios_init: entry in high memory, trying direct PCI access
sales02 kernel: pcibios_init: Using configuration type 1
sales02 kernel: Probing PCI hardware.
sales02 kernel: Calibrating delay loop.. ok - 48.03 BogoMIPS
sales02 kernel: Memory: 30932k/32768k available (700k kernel code, 384k
reserved, 752k data)
sales02 kernel: Swansea University Computer Society NET3.035 for Linux 2.0
sales02 kernel: NET3: Unix domain sockets 0.13 for Linux NET3.035.
sales02 kernel: Swansea University Computer Society TCP/IP for NET3.034
sales02 kernel: IP Protocols: ICMP, UDP, TCP
sales02 kernel: Checking 386/387 coupling... Ok, fpu using exception 16
error reporting.
sales02 kernel: Checking 'hlt' instruction... Ok.
sales02 kernel: Intel Pentium with F0 0F bug - workaround enabled.
sales02 kernel: alias mapping IDT readonly ... ... done
sales02 kernel: Linux version 2.0.35 ([EMAIL PROTECTED]) (gcc
version 2.7.2.3) #1 Fri Dec 18 15:15:29 GMT+7 1998
sales02 kernel: Starting kswapd v 1.4.2.2
sales02 kernel: Serial driver version 4.13 with no serial options enabled
sales02 kernel: tty00 at 0x03f8 (irq = 4) is a 16550A
sales02 kernel: tty01 at 0x02f8 (irq = 3) is a 16550A
sales02 kernel: PS/2 auxiliary pointing device detected -- driver installed.
sales02 kernel: loop: registered device at major 7
sales02 kernel: Floppy drive(s): fd0 is 1.44M
sales02 kernel: FDC 0 is a National Semiconductor PC87306
sales02 kernel: scsi0 : AM53/79C974 PCscsi driver rev. 0.5; host I/O
address: 0x7100; irq: 11
sales02 kernel:
sales02 kernel: scsi : 1 host.
sales02 kernel: Vendor: SEAGATE Model: ST12400N SUN2.1G Rev: 8720
sales02 kernel: Type: Direct-Access ANSI SCSI
revision: 02
sales02 kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
sales02 kernel: Vendor: SEAGATE Model: ST12400N SUN2.1G Rev: 8720
sales02 kernel: Type: Direct-Access ANSI SCSI
revision: 02
sales02 kernel: Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
sales02 kernel: Vendor: SEAGATE Model: ST410800N Rev: 0016
sales02 kernel: Type: Direct-Access ANSI SCSI
revision: 02
sales02 kernel: Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
sales02 kernel: scsi : detected 3 SCSI disks total.
sales02 kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 4194685
[2048 MB] [2.0 GB]
sales02 kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4194685
[2048 MB] [2.0 GB]
sales02 kernel: SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17770389
[8676 MB] [8.7 GB]
sales02 kernel: The PCI BIOS has not enabled the AMD Ethernet device at
0-58. Updating PCI command 01c1->01c5.
sales02 kernel: eth0: PCnet32 at 0x7000, 00 80 5f 7c d9 5bpcnet32.c:v0.99B
4/4/98 DJBecker/TSBogend.
sales02 kernel: Partition check:
sales02 kernel: sda: sda1 sda2 sda3 sda4
sales02 kernel: sdb: sdb1 sdb2
sales02 kernel: sdc: sdc1 sdc2 sdc3 sdc4
sales02 kernel: VFS: Mounted root (ext2 filesystem) readonly.
sales02 kernel: Adding Swap: 72288k swap-space (priority -1)
sales02 named[246]: starting. named 4.9.6-REL Thu Nov 6 23:29:57 EST 1997
^[EMAIL PROTECTED]:/usr/src/bs/BUILD/bind-4.9.6/named
sales02 named[246]: cache zone "" loaded (serial 0)
sales02 named[246]: primary zone "0.0.127.in-addr.arpa" loaded (serial
1997022700)
sales02 named[247]: Ready to answer queries.
sales02 mountd[269]: unable to register (mountd, 1, udp).
sales02 nfsd[277]: unable to register (nfsd, 2, udp).
sales02 ypserv[290]: unable to register (YPPROG, YPVERS, udp).
______________________________________________________________________
Utk berhenti langganan kirim email ke [EMAIL PROTECTED]
Sudah cari di arsip? http://www.linux.or.id/milis.php3#arsip-id-linux
Utk info etika diskusi, kirim email kosong ke [EMAIL PROTECTED]
