--- Start of Idrisi List message Hi there - Has anyone else had trouble using PROJECT to get from one REF system to another, when neither of the REF systems are Lat/Long? Am I missing something or perhaps I am just unlucky? I am typically projecting rather large files (around 50 to 100 Mb at each end) of rather large geographical areas (Europe, China, etc.). If I use PROJECT to get from REF-1 to Lat/Long, then use it again to get from Lat/Long to REF-2, then this approach seems to be OK. When I try to do it in one step (i.e. REF-1 straight to REF-2) the error I get is "Division by zero". Requiring to use the two-step process is a bit of a burden, as these projections can take hours and I usually do them overnight. Any further insight would be most welcome. Cheers, Graham =================================================== Graham Gow Garrad Hassan and Partners Ltd. Unit 6.04, West of Scotland Science Park, Maryhill Road, Glasgow, G20 0SP, Scotland, UK. Tel. : +44 (0)141-945-4774 Fax. : +44 (0)141-945-5076 email : [EMAIL PROTECTED] =================================================== --- End of Idrisi List message IDRISI-L is an unmoderated list. As a service to list users, please post a summary of useful responses to your questions. To post a message to IDRISI-L, send it to [EMAIL PROTECTED] To subscribe to the list, send an email from the address to be subscribed to [EMAIL PROTECTED] with "subscribe" (without quotes) as the first line of the message body. To unsubscribe, do the same, only with "unsubscribe" as the first line of the message body.
