The IESG has received a request from the IPv6 Operations WG (v6ops) to consider the following document: - 'IPv6 Multihoming without Network Address Translation' <draft-ietf-v6ops-ipv6-multihoming-without-ipv6nat-00.txt> as an Informational RFC
The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the i...@ietf.org mailing lists by 2011-06-21. Exceptionally, comments may be sent to i...@ietf.org instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract Network Address and Port Translation (NAPT) works well for conserving global addresses and addressing multihoming requirements, because an IPv4 NAPT router implements three functions: source address selection, next-hop resolution and optionally DNS resolution. For IPv6 hosts one approach could be the use of IPv6 NAT. However, NAT should be avoided, if at all possible, to permit transparent host-to- host connectivity. In this document, we analyze the use cases of multihoming. We also describe functional requirements for multihoming without the use of NAT in IPv6 for hosts and small IPv6 networks that would otherwise be unable to meet minimum IPv6 allocation criteria. The file can be obtained via http://datatracker.ietf.org/doc/draft-ietf-v6ops-ipv6-multihoming-without-ipv6nat/ IESG discussion can be tracked via http://datatracker.ietf.org/doc/draft-ietf-v6ops-ipv6-multihoming-without-ipv6nat/ No IPR declarations have been submitted directly on this I-D. _______________________________________________ IETF-Announce mailing list IETF-Announce@ietf.org https://www.ietf.org/mailman/listinfo/ietf-announce
