The IESG has received a request from the Network Time Protocol WG (ntp) to consider the following document: - 'Control Messages Protocol for Use with Network Time Protocol Version 4' <draft-ietf-ntp-mode-6-cmds-08.txt> as Historic RFC
The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the [email protected] mailing lists by 2020-06-15. Exceptionally, comments may be sent to [email protected] instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract This document describes the structure of the control messages that were historically used with the Network Time Protocol before the advent of more modern control and management approaches. These control messages have been used to monitor and control the Network Time Protocol application running on any IP network attached computer. The information in this document was originally described in Appendix B of RFC 1305. The goal of this document is to provide a current, but historic, description of the control messages as described in RFC 1305 and any additional commands implemented in NTP. The publication of this document is not meant to encourage the developement and deployment of these control messages. This document is only providing a current reference for these control messages given the current status of RFC 1305. The file can be obtained via https://datatracker.ietf.org/doc/draft-ietf-ntp-mode-6-cmds/ No IPR declarations have been submitted directly on this I-D. _______________________________________________ IETF-Announce mailing list [email protected] https://www.ietf.org/mailman/listinfo/ietf-announce
