The IESG has received a request from the Multiprotocol Label Switching WG (mpls) to consider the following document: - 'OSPFv3 CodePoint for MPLS LSP Ping' <draft-ietf-mpls-lsp-ping-ospfv3-codepoint-04.txt> as Proposed Standard
The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the [email protected] mailing lists by 2021-06-21. Exceptionally, comments may be sent to [email protected] instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract IANA has created "Protocol in the Segment IS Sub-TLV" and "Protocol in the Label Stack Sub-TLV of the Downstream Detailed Mapping TLV" registries under the "Multi-Protocol Label Switching (MPLS) Label Switched Paths (LSPs) Ping Parameters" registry. RFC8287 defines the code points for OSPF and IS-IS. This document proposes the code point to be used in the Segment ID Sub-TLV and Downstream Detailed Mapping TLV when the IGP is OSPFv3. This document also updates RFC8287 by clarifying that the existing "OSPF" code point is to be used only to indicate OSPFv2, and by defining the behavior when the Segment ID SUb-TLV indicates the use of IPv6. The file can be obtained via https://datatracker.ietf.org/doc/draft-ietf-mpls-lsp-ping-ospfv3-codepoint/ No IPR declarations have been submitted directly on this I-D. _______________________________________________ IETF-Announce mailing list [email protected] https://www.ietf.org/mailman/listinfo/ietf-announce
